Paper
14 September 2001 Alternating phase-shifting mask with reduced aberration sensitivity: lithography considerations
Alfred K. K. Wong, Lars W. Liebmann, Antoinette F. Molless
Author Affiliations +
Abstract
Aberration sensitivity of alternating phase-shifting masks (PSMs) can be reduced by taking advantage of the trim exposure. Rather than a single phase region bordering each edge of a line, the enhanced alternating PSM technique uses multiple phase regions. The number of phase regions and their widths can be optimized for overall process tolerance including aberration sensitivity and exposure latitude. For exposure with a wavelength of 248 nm and a numerical aperture of 0.68, the optimal number of phase regions is two, with widths between 100 nm and 200 nm. These auxiliary phase regions do not affect the final pattern if a light-field trim mask is used. No extra processing step is necessary. With the enhanced alternating PSM technique, isolated lines of average dimension as small as 36 nm can be delineated using 248 nm lithography with a 3(sigma) linewidth control of 13.4 nm. The mean critical dimension of 36 nm corresponds to k1 equals 0.1.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alfred K. K. Wong, Lars W. Liebmann, and Antoinette F. Molless "Alternating phase-shifting mask with reduced aberration sensitivity: lithography considerations", Proc. SPIE 4346, Optical Microlithography XIV, (14 September 2001); https://doi.org/10.1117/12.435742
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 21 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Phase shifts

Critical dimension metrology

Lithography

Image quality

Monochromatic aberrations

Tolerancing

Back to Top