Paper
7 September 2001 Damage mechanism involved in the solid particle erosion of CVD diamond
Alun R. Davies, John E. Field
Author Affiliations +
Abstract
Sophisticated electro-optic sensors are employed on aircraft and missiles, and it is essential to protect them from relatively high-speed impacts with airborne dust particles. A loss in transmission caused by such an event can impair guidance, and catastrophic failure may occur. Protection is afforded by the installation of a hard cover that is transparent in the relevant regime. Diamond is potentially by far the most attractive window material due to excellent optical and mechanical properties, but it is difficult to shape. Chemical vapor deposited (CVD) diamond is a polycrystalline synthetic with properties that approach those of single crystal diamond, and it can be more easily shaped. The aims of the present research were to quantify the erosion and transmission losses, and to understand the material removal mechanisms involved. Steady-state erosion rates were obtained for CVD diamond of different grain sizes, using 300-600 micrometers quartz erodent at velocities between 60 and 140 m/s. Images of CVD diamond at various stages of erosion, obtained using an optical microscope and an environmental scanning electron microscope (ESEM), reveal that erosion initially occurs at grain boundaries and that so-called micro-features also have some influence on erosion.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alun R. Davies and John E. Field "Damage mechanism involved in the solid particle erosion of CVD diamond", Proc. SPIE 4375, Window and Dome Technologies and Materials VII, (7 September 2001); https://doi.org/10.1117/12.439173
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond

Chemical vapor deposition

Particles

Sapphire

Crystals

Solids

Surface roughness

Back to Top