Diode laser interferometer for surface profilometry with nanometer resolution on lateral dimensions in the centimeter range

Karl Meiners-Hagen; Ahmed Abou-Zeid

doi:10.1117/12.445588

3 October 2001 Diode laser interferometer for surface profilometry with nanometer resolution on lateral dimensions in the centimeter range

Karl Meiners-Hagen, Ahmed Abou-Zeid

Author Affiliations +

Proceedings Volume 4399, Optical Measurement Systems for Industrial Inspection II: Applications in Production Engineering; (2001) https://doi.org/10.1117/12.445588
Event: Lasers in Metrology and Art Conservation, 2001, Munich, Germany

Abstract

Conventional laser interferometers offers a nanometer resolution but their result are ambiguous if distance variations of more than half a wavelength occur between two measured points. This a rather strong limitation for surface profilometry on surfaces with steps larger than this value. By using multiple wavelengths the accessible range of unambiguousness can be extended to half the result in synthetic wavelength. With three laser diodes emitting in the near IR synthetic wavelengths of approximately 15 micrometers and 290 micrometers could be achieved. This allows calculating the phase of the optical wavelength unequivocal within 145 micrometers . A nanometer resolution was reached with a phase interpolation of 1/100 of the optical wavelength. The laser beams are coupled into an interferometer through a single monomode fiber, and all interference signals are measured by one photo diode simultaneously. This leads to an easy alignment of the optical set-up and avoids the use of polarization optics and retardation plates. The injection currents of the laser diodes are modulated with different frequencies around 1MHz. Using lock-in amplifiers the three interference signals are separated electronically. The high modulation frequencies allow a fast measuring rate of up to 10 kHz. The sample surface as one mirror of the interferometer is scanned by moving the sample with mechanical translation stages in x- and y-direction. These mechanical stages exhibit unwanted vertical movement of up to 250 nm on a travel of several millimeter. By combining the mechanical stages with a piezo driven stage this vertical movement can be corrected resulting in a nanometer resolution in z-direction over a lateral range of several centimeters.

Citation Download Citation

Karl Meiners-Hagen and Ahmed Abou-Zeid "Diode laser interferometer for surface profilometry with nanometer resolution on lateral dimensions in the centimeter range", Proc. SPIE 4399, Optical Measurement Systems for Industrial Inspection II: Applications in Production Engineering, (3 October 2001); https://doi.org/10.1117/12.445588

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available