Paper
7 August 2002 Probability-of-detect-based beam pointing for multitarget tracking with electronically scanned radars
Andrew H. Register, George C. Brown, W. Dale Blair
Author Affiliations +
Abstract
Since the time and energy of phased array radars are under great demand in modern combat systems, methods that conserve those resources are very important. Two opportunities for conserving radar resources that have not been fully exploited when tracking closely-spaced objects with currently deployed systems are revisit time selection (i.e., time to make a measurement) and beam boresight placement. While these two functions are somewhat coupled, this paper addresses only the problem of beam pointing. Previously, a methodology for track management for phased array radars hinged on the concept of organizing tracks into, so called, dwell groups that included closely-spaced targets that could be illuminated with a single beam. Pointing angle for a dwell group was determined using a geometry-based approach. While the geometry-based approach was useful in improving the entire track management function, it was known to be sub-optimal in that the detection characteristics of the targets were not considered. This paper addresses an improved methodology for assigning membership in dwell groups and selecting dwell pointing angles.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew H. Register, George C. Brown, and W. Dale Blair "Probability-of-detect-based beam pointing for multitarget tracking with electronically scanned radars", Proc. SPIE 4728, Signal and Data Processing of Small Targets 2002, (7 August 2002); https://doi.org/10.1117/12.478499
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Radar

Antennas

Target detection

Phased arrays

Signal to noise ratio

Palladium

Convolution

Back to Top