Paper
1 August 2003 Characterization of organic film with scanning acoustic microscopy
Author Affiliations +
Abstract
The present article reports a technique to measure velocity of an organic film deposited on a homogeneous substrate, wherein the thickness of the film and the diameter of the measured area of the specimen are in the order of a few microns. A thinly sliced human kidney was selected as an example of an organic film. The thickness of the specimen was substantially 3 μm. For the substrate, fused quartz was used because its elastic properties are known and stable. The spherical acoustic lens was used to determine the position for measurement. The frequencies at 400 MHz and 600 MHz were used for the measurement and the visualization, respectively. The generation of the Rayleigh waves under the above conditions was simulated by numerical calculations based onthe wave propagation theory for layered media.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chiaki Miyasaka, Jikai Du, and Bernhard R. Tittmann "Characterization of organic film with scanning acoustic microscopy", Proc. SPIE 5046, Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Composites II, (1 August 2003); https://doi.org/10.1117/12.484113
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Acoustics

Ultrasonics

Fused quartz

Velocity measurements

Kidney

Tissues

Transducers

Back to Top