Paper
28 May 2004 Specification of the phase angle of a 6% attenuated PSM mask used in ArF lithography
Author Affiliations +
Abstract
As 6% attenuated phase shift masks (PSM) become commonly used in ArF advanced lithography for the 90nm Technology and mass production to print lines/ spaces as well as contacts, the specification and control of the phase angle and the width of the distribution of phase angles becomes critical to maintain the quality of the lithography process. The influence of the mean phase angle and the width of the distribution of phase angles on the best focus, the through pitch behavior and uniformity of the critical dimension (CD uniformity) has been studied experimentally using a 6% attenuated PSM whose phase angle has been affected by several reticle cleans. The results are consistent with aerial image simulations. Independent specifications for the mean phase angle and the width of the distribution of phase angles have been derived and could be applied for the production of masks in the future.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ching-Hsu Chang, Jochen Schacht, Benjamin Szu-Min Lin, Kuei-Chun Hung, and I. Hsuing Huang "Specification of the phase angle of a 6% attenuated PSM mask used in ArF lithography", Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); https://doi.org/10.1117/12.535167
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Photomasks

Image transmission

Reticles

Lithography

Phase shifts

Scanning electron microscopy

RELATED CONTENT


Back to Top