High-precision surface mount assembly of micro-optical components per laser reflow soldering: positioning accuracy and thermal stability

Laurent Stauffer; Felix Walti; Urs Vokinger; Knut Siercks

doi:10.1117/12.545510

8 September 2004 High-precision surface mount assembly of micro-optical components per laser reflow soldering: positioning accuracy and thermal stability

Laurent Stauffer, Felix Walti, Urs Vokinger, Knut Siercks

Author Affiliations +

Proceedings Volume 5454, Micro-Optics: Fabrication, Packaging, and Integration; (2004) https://doi.org/10.1117/12.545510
Event: Photonics Europe, 2004, Strasbourg, France

Abstract

A significant part of the work in developing micro-optics devices is solving the aspect of the packaging. The optical design requires very often an exact positioning of the optical components along the six degrees of freedom. Numerous techniques are now proposed for aligning (passively or actively) and fixing the optical components in the aligned position for a long-term stability. The Swiss Federal Institute of Technology in Lausanne and Leica Geosystems in Heerbrugg developed a novel automated assembly technique called TRIMO-SMD suited to assemble modules composed of small optical components (maximum diameter of 2mm). The attachment procedure is based on a highly stable laser reflow soldering process between standard metal holders housing the optical components and a metallized transparent mounting plate. The active alignment in all six degrees of freedom of the optical holder is performed with a high stiffness and high-resolution robot system. A test procedure has been developed for quantifying the positioning accuracy after soldering and the thermal stability of the TRIMO mounts. The displacements of the TRIMO holders during the soldering process and during a thermal load have been measured by means of standard laboratory vision sensors along with a 2D least square matching processing. One micron TRIMO assembly precision could be demonstrated.

Citation Download Citation

Laurent Stauffer, Felix Walti, Urs Vokinger, and Knut Siercks "High-precision surface mount assembly of micro-optical components per laser reflow soldering: positioning accuracy and thermal stability", Proc. SPIE 5454, Micro-Optics: Fabrication, Packaging, and Integration, (8 September 2004); https://doi.org/10.1117/12.545510

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE