Paper
12 October 2004 Cryogenic performance of lightweight SiC and C/SiC mirrors
James B. Hadaway, Ron Eng, H. Philip Stahl, James R. Carpenter, Jeffrey R. Kegley, William D. Hogue
Author Affiliations +
Abstract
The technology associated with the use of silicon carbide (SiC) for high-performance mirrors has matured significantly over the past 10-20 years. More recently, the material has been considered for cryogenic applications such as space-based infrared telescopes. In light of this, NASA has funded several technology development efforts involving SiC mirrors. As part of these efforts, three lightweight SiC mirrors have been optically tested at cryogenic temperatures within the X-Ray Calibration Facility (XRCF) at Marshall Space Flight Center (MSFC). The three mirrors consisted of a 0.50 m diameter carbon fiber-reinforced SiC, or C/SiC, mirror from IABG in Germany, a 0.51 m diameter SiC mirror from Xinetics, Inc., and a 0.25 m diameter SiC mirror from POCO Graphite, Inc. The surface figure error was measured interferometrically from room temperature (~290 K) to ~30 K for each mirror. The radius-of-curvature (RoC) was also measured over this range for the IABG C/SiC & Xinetics SiC mirrors. This paper will describe the test goals, the test instrumentation, and the test results for these cryogenic tests.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James B. Hadaway, Ron Eng, H. Philip Stahl, James R. Carpenter, Jeffrey R. Kegley, and William D. Hogue "Cryogenic performance of lightweight SiC and C/SiC mirrors", Proc. SPIE 5487, Optical, Infrared, and Millimeter Space Telescopes, (12 October 2004); https://doi.org/10.1117/12.552409
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon carbide

Cryogenics

Monochromatic aberrations

Temperature metrology

Polishing

Manufacturing

RELATED CONTENT


Back to Top