Paper
31 January 2005 Improvement of ohmic contact to P-type GaN using two-step activation processing
Zhi-Nong Yu, Wei Xue, Jong-Wook Seo, Soon-Jae Yu
Author Affiliations +
Abstract
A two-step rapid thermal annealing (RTA) process was investigated for electrical activation of magnesium doped GaN layer. The samples were studied by room temperature Hall measurements and I-V curve. In the two-step RTA process, the first low temperature step (600°C) with a long annealing time (4 min) was followed by the second high temperature (850°C) step with a short annealing time. A hole concentration of 1.39×1018cm-3 was achieved for the activated sample. And the specific contact resistance for Ni/Au-contacted p-GaN was determined to be 1.8×10-4Ω.cm2, These results show that the two-step RTA process significantly improves the electrical properties of P-GaN layer compared to the one-step RTA process.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhi-Nong Yu, Wei Xue, Jong-Wook Seo, and Soon-Jae Yu "Improvement of ohmic contact to P-type GaN using two-step activation processing", Proc. SPIE 5624, Semiconductor and Organic Optoelectronic Materials and Devices, (31 January 2005); https://doi.org/10.1117/12.572520
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Annealing

Gallium nitride

Magnesium

Hydrogen

Metalorganic chemical vapor deposition

Resistance

Temperature metrology

Back to Top