Paper
23 March 2005 The effects of motive gas physical properties on the performance of ejector for chemical lasers
Jungkun Jin, Sehoon Kim, Hyuckmo Kwon, Sejin Kwon
Author Affiliations +
Proceedings Volume 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2005) https://doi.org/10.1117/12.611002
Event: XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2004, Prague, Czech Republic
Abstract
Axi-symmetric annular type ejector has been developed as a pressure recovery system for HF/DF chemical laser. Ejector was tested using air as operating gases and low-pressure entrained flow was obtained. In this paper, we changed motive gas since operating gases for chemical laser system are products of chemical reaction. By selection of motive gas, physical properties of operating gas changes, therefore the performance of ejector is different for each motive gas, i.e., specific heat at constant pressure (CP) and average molecular weight (MW) on the effectiveness of ejection. The research was carried out by both numerical analysis using commercial CFD code, FLUENT and experiments.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jungkun Jin, Sehoon Kim, Hyuckmo Kwon, and Sejin Kwon "The effects of motive gas physical properties on the performance of ejector for chemical lasers", Proc. SPIE 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (23 March 2005); https://doi.org/10.1117/12.611002
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gases

Chemical lasers

Argon

Numerical analysis

Laser development

Laser systems engineering

Cerium

RELATED CONTENT

Characteristics of a downstream-mixing CO2 gas-dynamic laser
Proceedings of SPIE (February 01 1991)
Some Considerations On Laser Metal Cutting
Proceedings of SPIE (June 20 1989)
High-power chemical oxygen-iodine laser welding
Proceedings of SPIE (February 07 2000)

Back to Top