Picosecond fiber laser oscillator at 1.5um with 2.3W average output power and 160 MHz repetition rate

Pavel Polynkin; Alexander Polynkin; Dmitriy Panasenko; Masud Mansuripur; N. Peyghambarian; Jerome Moloney

doi:10.1117/12.647264

23 February 2006 Picosecond fiber laser oscillator at 1.5 μm with 2.3W average output power and 160 MHz repetition rate

Pavel Polynkin, Alexander Polynkin, Dmitriy Panasenko, Masud Mansuripur, N. Peyghambarian, Jerome Moloney

Author Affiliations +

Proceedings Volume 6102, Fiber Lasers III: Technology, Systems, and Applications; 610216 (2006) https://doi.org/10.1117/12.647264
Event: Lasers and Applications in Science and Engineering, 2006, San Jose, California, United States

Abstract

Heavily doped active fibers based on the soft phosphate glass offer an attractive gain medium for compact and high-power laser oscillators. We report a passively modelocked fiber oscillator at 1.5μm based on such active fiber. The standing-wave laser cavity consists of a 20cm-long piece of the side-pumped active phosphate fiber which is heavily co-doped with Er and Yb ions, and a low-ratio fused coupler. The length of the all-fiber laser cavity is 65cm. The modelocked operation of the oscillator is started and sustained by a Semiconductor Saturable Absorber Mirror (SESAM), and no additional pulse narrowing mechanism is used. In order to avoid a premature over-saturation of the SESAM, the fiber end which is butt-coupled to the SESAM is adiabatically tapered which expands the propagating fiber mode and decreases the power density incident on the absorber substantially. The stable modelocked operation of the laser oscillator occurs in the range between 0.65W and 2.3W of the average output power, which is limited by the maximum available pump power at 975nm. The peak pulse power is limited by the saturated SESAM at ~450W, and the pulse width grows from 11psec to 35psec as the pump power is increased. At the pulse repetition rate of 160MHz, the pulse energy reaches 14.4nJ. Our laser oscillator combines the convenience of the all-fiber construction with the power performance previously achievable only with the modelocked bulk-optic laser oscillators or more complex systems involving fiber amplifiers.

Citation Download Citation

Pavel Polynkin, Alexander Polynkin, Dmitriy Panasenko, Masud Mansuripur, N. Peyghambarian, and Jerome Moloney "Picosecond fiber laser oscillator at 1.5 μm with 2.3W average output power and 160 MHz repetition rate", Proc. SPIE 6102, Fiber Lasers III: Technology, Systems, and Applications, 610216 (23 February 2006); https://doi.org/10.1117/12.647264

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Oscillators

Fiber lasers

Pulsed laser operation

Mode locking

Laser resonators

Fiber amplifiers

Mirrors

Show All Keywords

Keywords/Phrases

Search In:

Publication Years