Paper
9 June 2006 Surface quality of large KDP crystal fabricated by single-point diamond turning
Jing Hou, Jianfeng Zhang, Jinlin Chen, Xiaoli Zhang, Dezhi Hu
Author Affiliations +
Proceedings Volume 6149, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 61492M (2006) https://doi.org/10.1117/12.674288
Event: 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2005, Xian, China
Abstract
Ptassium dihydrogen phosphate (KDP) crystals are used as key components in high power density solid-state laser for Inertial Confinement Fusion. Surface quality is an important factor for KDP crystals implemented in high power lasers. At present Single Point Diamond Turning(SPDT) is the only way to get the required transmitted wavefront and damage threshold KDP. The paper introduces something about the defects of KDP crystals fabricating and analyses some reasons. Based on the analysis of the reasons, the process parameters can be adjusted to meet the critical requirements of high energy density application. A piece of 320X320 mm2 KDP is acquired. The roughness of the 320X320 mm2 crystal surface was already to reach an rms about 5 nm. Data were measured by an interferometric microscope. The wavefront p-v is lower than 0.5λ(λ=632nm).
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jing Hou, Jianfeng Zhang, Jinlin Chen, Xiaoli Zhang, and Dezhi Hu "Surface quality of large KDP crystal fabricated by single-point diamond turning", Proc. SPIE 6149, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 61492M (9 June 2006); https://doi.org/10.1117/12.674288
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Laser crystals

Single point diamond turning

Surface finishing

Wavefronts

Diamond

High power lasers

RELATED CONTENT


Back to Top