Paper
23 February 2006 Optical system integration of near infrared laser altimeter
Haihong Zhang, Jianyu Wang, Rong Shu, Yihua Hu, Kangmei Fang
Author Affiliations +
Abstract
The method for designing beam expander of near infrared laser altimeter is discussed in the paper. By designing the beam expander with 632.8nm and 1064nm respectively and integrating it with 632.8nm design but compensating the chromatic aberration with 1064nm design with gasket and finally testing the result with 1064nm laser, the beam expander with requirement magnification is integrated. With a simulate detector and a Continuous-Wave (CW) 1064nm laser, an infinite light with divergence of the Field-of-View (FOV) of the telescope is produced. By acquiring the image of this infinite lignt and the laser transmitter at a 4m collimator's focal plane using a CCD camera and adjusting the relative azimuth and pitching of the transmitter and receiver, the alignment of the two subsystems is finished with the decentration less than 5%.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haihong Zhang, Jianyu Wang, Rong Shu, Yihua Hu, and Kangmei Fang "Optical system integration of near infrared laser altimeter", Proc. SPIE 6150, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 61503E (23 February 2006); https://doi.org/10.1117/12.678615
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam expanders

Sensors

Receivers

Telescopes

Transmitters

Collimators

Continuous wave operation

Back to Top