Requirements validation testing on the 7 optical fiber array connector/cable assemblies for the Lunar Reconnaissance Orbiter (LRO)

Melanie N. Ott; Xiaodan Linda Jin; Frank V. LaRocca; Adam Matuszeski; Richard F. Chuska; Shawn L. MacMurphy

doi:10.1117/12.733965

26 September 2007 Requirements validation testing on the 7 optical fiber array connector/cable assemblies for the Lunar Reconnaissance Orbiter (LRO)

Melanie N. Ott, Xiaodan Linda Jin, Frank V. LaRocca, Adam Matuszeski, Richard F. Chuska, Shawn L. MacMurphy

Author Affiliations +

Proceedings Volume 6713, Nanophotonics and Macrophotonics for Space Environments; 67130Q (2007) https://doi.org/10.1117/12.733965
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

In the past year, a unique capability has been created by NASA Goddard Space Flight Center (GSFC) in support of Lunar Exploration. The photonics group along with support from the Mechanical Systems Division, developed a seven fiber array assembly using a custom Diamond AVIM PM connector for space flight applications. This technology enabled the Laser Ranging Application for the LRO to be possible. Laser pulses at 532 nm will be transmitted from the earth to the LRO stationed at the moon and used to make distance assessments. The pulses will be collected with the Laser Ranging telescope and focused into the array assemblies. The array assemblies span down a boom, through gimbals and across the space craft to the instrument the Lunar Orbiter Laser Altimeter (LOLA). Through use of a LOLA detector the distance between the LRO and the Earth will be calculated simultaneously while LOLA is mapping the surface of the moon. The seven fiber array assemblies were designed in partnership with W.L. Gore, Diamond Switzerland, and GSFC, manufactured by the Photonics Group at NASA Goddard Space Flight Center (GSFC) and tested for environmental effects there as well. Presented here are the requirements validation testing and results used to insure that these unique assemblies would function adequately during the Laser Ranging 14-month mission. The data and results include in-situ monitoring of the optical assemblies during cold gimbal motion life-testing, radiation, vibration and thermal testing.

Citation Download Citation

Melanie N. Ott, Xiaodan Linda Jin, Frank V. LaRocca, Adam Matuszeski, Richard F. Chuska, and Shawn L. MacMurphy "Requirements validation testing on the 7 optical fiber array connector/cable assemblies for the Lunar Reconnaissance Orbiter (LRO)", Proc. SPIE 6713, Nanophotonics and Macrophotonics for Space Environments, 67130Q (26 September 2007); https://doi.org/10.1117/12.733965

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE