Fabrication and testing of a high-precision concave spherical mirror

Jan Burke; Katie Green; Wayne Stuart; Edita Puhanic; Achim Leistner; Bob Oreb

doi:10.1117/12.793522

11 August 2008 Fabrication and testing of a high-precision concave spherical mirror

Jan Burke, Katie Green, Wayne Stuart, Edita Puhanic, Achim Leistner, Bob Oreb

Proceedings Volume 7064, Interferometry XIV: Applications; 70640E (2008) https://doi.org/10.1117/12.793522
Event: Optical Engineering + Applications, 2008, San Diego, California, United States

Abstract

CSIRO's Australian Centre for Precision Optics has recently finished the production of a high-precision concave spherical mirror. The specifications were very ambitious: numerical aperture 0.75; asphericity below 5.5 nm rms and 27.3 nm P-V. The available reference transmission sphere had to be calibrated to enable adequate accuracy. Due to the high numerical aperture of the mirror, sub-aperture measurements had to be stitched together to form a complete surface map of the mirror. Phase-shifting interferometry at high numerical aperture suffers from phase-step non-uniformity because of the large off-axis angles. We present what we believe to be a new interpretation of this phenomenon as a focus error, which clarifies where in the interferometer the phase-shift error occurs. We discuss the ball-averaging method for calibrating the reference transmission sphere and present results from the averaging process to ensure an uncertainty commensurate with the certification requirement. For carrying out the sub-aperture measurements, we constructed a two-axis gimbal mount to swivel the mirror around the focus of the test wavefront. If the centers of curvature of the transmission sphere and the mirror coincide, the mirror can be tilted without losing the interferogram. We present a simple and effective alignment method, which can be generally applied to optical tests where the wavefront comes to a focus. The mirror was coated with protected aluminum and tested in its mount. No effect on the sphericity error from the coating was found, and the specifications were exceeded by approximately 30%. We discuss subtleties of the stitching process on curved surfaces and report final results.

Citation Download Citation

Jan Burke, Katie Green, Wayne Stuart, Edita Puhanic, Achim Leistner, and Bob Oreb "Fabrication and testing of a high-precision concave spherical mirror", Proc. SPIE 7064, Interferometry XIV: Applications, 70640E (11 August 2008); https://doi.org/10.1117/12.793522

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available