Paper
18 February 2009 Self-induced pulsing in Tm3+-doped fiber lasers with different output couplings
Yulong Tang, Jianqiu Xu
Author Affiliations +
Abstract
Under the pump of a diode laser at 790 nm, self-pulsing phenomena of ~2 μm Tm3+-doped fiber lasers are investigated. Laser cavity configuration is changed by using different output-coupling mirrors. When the polished fiber-end (Fresnel reflection) is used as the output coupler, the cavity is dubbed as "bad" cavity. With this "bad" cavity, regular laser pulse trains can be obtained near threshold pump level. The pulse width and repetition rate are several micro seconds and several kilohertz, respectively. At higher pump levels, the regular pulse-train shape is broken, and some random pulses occur. At the same time, similar mode-locking phenomenon can be observed. When the output coupler is changed to a T=10% (at 2μm) mirror, regular laser pulse train still can be observed near threshold pump. However, a slight increase of pump leads to randomization of the pulse train. Similar mode-locking phenomenon was not observed with this kind of cavity. When the output coupling is decreased to T=5%, even near the pump threshold, regular pulse train can not be achieved. With increased pump powers, laser output changes from pulse state to continuous wave. Based on the experimental results, a theoretical model is proposed and the origin of self-pulsing is discussed.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yulong Tang and Jianqiu Xu "Self-induced pulsing in Tm3+-doped fiber lasers with different output couplings", Proc. SPIE 7276, Photonics and Optoelectronics Meetings (POEM) 2008: Laser Technology and Applications, 72760L (18 February 2009); https://doi.org/10.1117/12.822920
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Ions

Output couplers

Continuous wave operation

Pulsed laser operation

Energy transfer

Laser damage threshold

RELATED CONTENT


Back to Top