PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
Oxygen plasmas used for pattern transfer in multilevel lithography have been characterized over a range of plasma parameters such as power and pressure. Etch rates of silicon dioxide and representative silicon-containing and planarizing polymers are correlated with these plasma parameters. Plasma diagnostic measurements include DC self-bias voltage, ion flux and incident ion energy distributions. Measurement of ion energy distributions yields fundamental information about the etching process since Si02 sputter rates and oxygen ion implant depths are strong functions of ion energy.
Mark A. Hartney,Wayne M. Greene,Dennis W. Hess, andDavid S. Soong
"Oxygen Reactive Ion Etching For Multilevel Lithography", Proc. SPIE 0771, Advances in Resist Technology and Processing IV, (25 August 1987); https://doi.org/10.1117/12.940343
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Mark A. Hartney, Wayne M. Greene, Dennis W. Hess, David S. Soong, "Oxygen Reactive Ion Etching For Multilevel Lithography," Proc. SPIE 0771, Advances in Resist Technology and Processing IV, (25 August 1987); https://doi.org/10.1117/12.940343