Paper
6 August 2010 The Giant Magellan Telescope (GMT): hydrostatic constraints
Author Affiliations +
Abstract
The Giant Magellan Telescope (GMT) is an optical-infrared 25 Meter ELT to be located in Chile. It is being designed and constructed by a group of U.S. and international universities and research institutions1. Structural performance of large telescopes can be enhanced significantly with the added stiffness that results from distributing loads to many points in the structure. In defining the two rotating assemblies in an altitude-over-azimuth mount more than a kinematic set of constraints can lead to hydrostatic bearing oil film failure due to unintended forces that result from runner bearing irregularities. High Frequency Over Constraint (HFOC) increases stiffness without risk of oil film failure. It was used successfully on the Magellan 6.5 Meter Telescopes. GMT will employ this and two additional methods to enhance stiffness at frequencies from DC wind up through the telescope primary mode frequencies of ~11 Hz. This will be achieved without excessive hydrostatic bearing pad forces. Detailed discussion of GMT's hydrostatic constraints, azimuth track and optics support structure (OSS) runner bearing illustrations, and performance criteria are provided for the design.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steve Gunnels "The Giant Magellan Telescope (GMT): hydrostatic constraints", Proc. SPIE 7733, Ground-based and Airborne Telescopes III, 77334Z (6 August 2010); https://doi.org/10.1117/12.857513
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Kinematics

Manufacturing

Optical instrument design

Large telescopes

Solids

Beam shaping

RELATED CONTENT


Back to Top