Paper
19 October 2010 Fabrication of a multimode-interference-based multimode power splitter in glass
Author Affiliations +
Abstract
Multimode Interference (MMI) based devices are widely used due to excellent performance. Here in this paper, a 1×2 multimode power splitter based on MMI is designed using three-dimensional beam propagation method (3D-BPM), and then fabricated in glass using the Ag+-Na+ ion-exchange technique. The width of the input and output multimode waveguides was 50μm and they were tapered to 75μm at the interface to the MMI region. The MMI region was also quadratically tapered .First, Ag+-Na+ ion exchange was run in nitrate melt at 350°C.Then an electric field was applied at 300°C so that the silver ions continued their migration award. Under the wavelength of 1550nm, the measured results showed that the propagation loss of multimode straight waveguide can be lower than 0.31dB/cm, and the insertion loss and uniformity of the splitter were 4.28dB and 0.21dB, respectively. Parameters of the fabrication process and structure of the device can be optimized to improve the performance of the device.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Xiang, Weiwei Zheng, Shuhang Jiang, Minghua Wang, Jianyi Yang, Yinlei Hao, and Xiaoqing Jiang "Fabrication of a multimode-interference-based multimode power splitter in glass", Proc. SPIE 7847, Optoelectronic Devices and Integration III, 78470N (19 October 2010); https://doi.org/10.1117/12.870755
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Brain-machine interfaces

Glasses

Silver

Ions

Multimode interference devices

Ion exchange

RELATED CONTENT

MMI splitter by ion exchange on K9
Proceedings of SPIE (December 05 2005)
Fabrication of 8×8 MMI optical coupler in BK7 by ion...
Proceedings of SPIE (January 17 2005)
MMI splitters by ion-exchange in glass
Proceedings of SPIE (March 24 2000)
Optimized 3D design of an MMI splitter with ion exchange...
Proceedings of SPIE (October 12 2005)

Back to Top