Assessment of PZT transducer bonding techniques under drop-weight impact loading in composites

Kyle R. Mulligan; Pierre-Claude Ostiguy; Patrice Masson; Saïd Elkoun; Nicolas Quaegebeur

doi:10.1117/12.880645

19 April 2011 Assessment of PZT transducer bonding techniques under drop-weight impact loading in composites

Kyle R. Mulligan, Pierre-Claude Ostiguy, Patrice Masson, Saïd Elkoun, Nicolas Quaegebeur

Author Affiliations +

Proceedings Volume 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011; 79833G (2011) https://doi.org/10.1117/12.880645
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

This paper describes the robustness of a structural health monitoring system (SHM) that utilizes lead-zirconatetitanate (PZT) transducers tested on carbon fibre composite coupons under drop-weight impact loading. Four PZT transducers are attached to the surface of 10.16 cm x 15.24 cm aerospace grade carbon fibre coupons using four types of adhesives: cyanoacrylate, epoxy, methyl methacrylate, and silicon. Each PZT transducer is tuned to excite preferentially an A0 mode guided wave burst into each composite coupon prior to and following an impact. The output from a PZT transducer, the amplitude of the propagating guided waves measured using a laser vibrometer on the coupon surface and the RMS velocity is plotted. The cycle is repeated for the three remaining transducers. The electrical admittance is also measured using an impedance analyzer prior to and following impact. This paper illustrates how a robustness metric expressed in terms of admittance can be used to infer the ability of the SHM system to generate guided waves and to detect damage following impact. The robustness metric is a measure of the adhesive strength and the mechanism to provide accurate damage detection results. It is shown that transducers attached using silicon provide accurate damage detection results based on pre-attached adhesive yielding difference of <0.5% obtained from electrical admittance measurements before and after impact.

Citation Download Citation

Kyle R. Mulligan, Pierre-Claude Ostiguy, Patrice Masson, Saïd Elkoun, and Nicolas Quaegebeur "Assessment of PZT transducer bonding techniques under drop-weight impact loading in composites", Proc. SPIE 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, 79833G (19 April 2011); https://doi.org/10.1117/12.880645

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE