Paper
15 November 2011 Development of a dual-axis optoelectronic precision level
Kuang-Chao Fan, Tsung-Han Wang, Sheng-Yi Lin, Yen-Chih Liu
Author Affiliations +
Proceedings Volume 8321, Seventh International Symposium on Precision Engineering Measurements and Instrumentation; 83213H (2011) https://doi.org/10.1117/12.905323
Event: Seventh International Symposium on Precision Engineering Measurements and Instrumentation, 2011, Yunnan, China
Abstract
This paper presents the design principle and applications of a innovative dual-axis optoelectronic level. A commercially available DVD pickup head is adopted as the angle sensor in association with the double-layer pendulum mechanism for dual-axis swings. A mass-damping system is analyzed to model the mechanical dynamics. Measured angles of both axes are processed by a microprocessor and displayed on a LCD or exported to an external PC. Compared with a triple-beam laser angular interferometer, the error of the dual-axis optoelectronic level is better than ±0.5 arc-seconds in the measuring range of ±20 arc-seconds, and the settling time is within 0.5 sec. Two experimental results show the consistency with a Renishaw interfereometer and its practical use in industry.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuang-Chao Fan, Tsung-Han Wang, Sheng-Yi Lin, and Yen-Chih Liu "Development of a dual-axis optoelectronic precision level", Proc. SPIE 8321, Seventh International Symposium on Precision Engineering Measurements and Instrumentation, 83213H (15 November 2011); https://doi.org/10.1117/12.905323
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital video discs

Optoelectronics

Head

Calibration

Sensors

Autocollimators

Interferometers

RELATED CONTENT

First report on a European round robin for slope measuring...
Proceedings of SPIE (September 16 2005)
Optoelectronic eye tracking system
Proceedings of SPIE (February 04 1997)
Scanning form measurement for curved surfaces
Proceedings of SPIE (September 15 2005)

Back to Top