Additive manufacturing of photopolymers using the Texas Instruments DLP lightcrafter

M. Hatzenbichler; M. Geppert; R. Seemann; J. Stampfl

doi:10.1117/12.2001651

8 March 2013 Additive manufacturing of photopolymers using the Texas Instruments DLP lightcrafter

M. Hatzenbichler, M. Geppert, R. Seemann, J. Stampfl

Proceedings Volume 8618, Emerging Digital Micromirror Device Based Systems and Applications V; 86180A (2013) https://doi.org/10.1117/12.2001651
Event: SPIE MOEMS-MEMS, 2013, San Francisco, California, United States

Abstract

The use of the Texas Instruments DLP^® LightCrafter^TM as a compact module in lithography-based additive manufacturing technologies (AMT) is discussed in this paper. For this purpose the light engine is placed underneath a transparent vat which is coated with a PTFE-film and filled with photosensitive resin. By loading an appropriate bitmap into the light engine, the resin can be exposed selectively to obtain a photopolymerized layer. To integrate the device into the building process, a configurable I/O trigger is required since the loaded bitmap should be exposed only in a certain period (exposure time). By stacking up the individual layers with a typical layer thickness between 25 and 50μm, a three-dimensional part is built up. The current setup of the used digital LEDs in combination with a customized optical projection system ensures a spatial and temporal homogeneity of the intensity at the build platform, which is significantly better than with traditionally used engines. It could be shown that this system can fabricate threedimensional parts with a resolution < 40μm in x-y plane and 15μm in z-axis. Additionally, mechanical properties (e.g. bending strength) were measured and potential anisotropies, which might be caused by the layered manufacturing process, were assessed. Ceramic-filled polymers were also used and the necessary post-processing steps like the removal of the polymer phase after structuring and the final sintering step to obtain fully dense ceramic parts are discussed.

Citation Download Citation

M. Hatzenbichler, M. Geppert, R. Seemann, and J. Stampfl "Additive manufacturing of photopolymers using the Texas Instruments DLP lightcrafter", Proc. SPIE 8618, Emerging Digital Micromirror Device Based Systems and Applications V, 86180A (8 March 2013); https://doi.org/10.1117/12.2001651

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available