Analysis of the light coupling between nano-waveguides made of tellurite glasses

J. Córdoba-Ramírez; H. E. Hernandez-Figueroa; Ferney Amaya-Fernández; J. D. Marconi; H. L. Fragnito

doi:10.1117/12.2003359

6 March 2013 Analysis of the light coupling between nano-waveguides made of tellurite glasses

J. Córdoba-Ramírez, H. E. Hernandez-Figueroa, Ferney Amaya-Fernández, J. D. Marconi, H. L. Fragnito

Author Affiliations +

Proceedings Volume 8627, Integrated Optics: Devices, Materials, and Technologies XVII; 86270H (2013) https://doi.org/10.1117/12.2003359
Event: SPIE OPTO, 2013, San Francisco, California, United States

Abstract

This paper presents a study (simulations) of coupling losses between adjacent waveguides made of tellurite glasses. These waveguides are designed to perform parametric amplifiers (PAs). PAs have some advantageous characteristics over the other optical amplifiers: they have broadband amplification bandwidth (depending on the dispersive characteristics of the waveguide), other all-optical functionalities, and can work at ultra-high bit rates (Pbit/s). PAs are based on the nonlinear phenomena of phase matched four-wave mixing between a strong pump and a weak signal. The parametric gain increases with the waveguide length, the pump power and the nonlinear coefficient of the waveguide. The best alternative to maximize the parametric gain is to reduce the pump power as much as possible, increasing the waveguide length and/or the nonlinear coefficient of the waveguide. The latter parameter can be enhanced by increasing the nonlinear refractive index of the material (n₂) or by reducing the waveguide effective area. Here we perform waveguides made of tellurite because these glasses have an n₂ that goes up to 30 x 10^-19 m²/W. On the other hand, the waveguide length can be increased by using an Archimedean spiral design. This geometry allows obtaining long waveguides (~1 m) within a small area. Using the Finite Element Method we study the separation distance between adjacent waveguides in order to obtain coupling lengths higher than the waveguide length (total losses < 2 dB/m). The waveguide dimensions are optimized to obtain a monomode waveguide with dispersive characteristics to perform PAs (around ~1550 nm spectral region).

Citation Download Citation

J. Córdoba-Ramírez, H. E. Hernandez-Figueroa, Ferney Amaya-Fernández, J. D. Marconi, and H. L. Fragnito "Analysis of the light coupling between nano-waveguides made of tellurite glasses", Proc. SPIE 8627, Integrated Optics: Devices, Materials, and Technologies XVII, 86270H (6 March 2013); https://doi.org/10.1117/12.2003359

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Waveguides

Glasses

Protactinium

Optical amplifiers

Dispersion

Refractive index

Silica

Show All Keywords

Keywords/Phrases

Search In:

Publication Years