Manufacturing and advanced characterization of sub-25nm diameter CD-AFM probes with sub-10nm tip edges radius

Johann Foucher; Pavel Filippov; Christian Penzkofer; Bernd Irmer; Sebastian W. Schmidt

doi:10.1117/12.2011451

10 April 2013 Manufacturing and advanced characterization of sub-25nm diameter CD-AFM probes with sub-10nm tip edges radius

Johann Foucher, Pavel Filippov, Christian Penzkofer, Bernd Irmer, Sebastian W. Schmidt

Author Affiliations +

Proceedings Volume 8681, Metrology, Inspection, and Process Control for Microlithography XXVII; 86811I (2013) https://doi.org/10.1117/12.2011451
Event: SPIE Advanced Lithography, 2013, San Jose, California, United States

Abstract

Atomic force microscopy (AFM) is increasingly used in the semiconductor industry as a versatile monitoring tool for highly critical lithography and etching process steps. Applications range from the inspection of the surface roughness of new materials, over accurate depth measurements to the determination of critical dimension structures. The aim to address the rapidly growing demands on measurement uncertainty and throughput more and more shifts the focus of attention to the AFM tip, which represents the crucial link between AFM tool and the sample to be monitored. Consequently, in order to reach the AFM tool’s full potential, the performance of the AFM tip has to be considered as a determining parameter. Currently available AFM tips made from silicon are generally limited by their diameter, radius, and sharpness, considerably restricting the AFM measurement capabilities on sub-30nm spaces. In addition to that, there’s lack of adequate characterization structures to accurately characterize sub-25nm tip diameters. Here, we present and discuss a recently introduced AFM tip design (T-shape like design) with precise tip diameters down to 15nm and tip radii down to 5nm fabricated from amorphous, high density diamond-like carbon (HDC/DLC) using electron beam induced processing (EBIP). In addition to that advanced design, we propose a new characterizer structure, which allows for accurate characterization and design control of sub-25nm tip diameters and sub-10nm tip edges radii. We demonstrate the potential advantages of combining a small tip shape design, i.e. tip diameter and tip edge radius, and an advanced tip characterizer for the semiconductor industry by the measurement of advanced lithography patterns.

Citation Download Citation

Johann Foucher, Pavel Filippov, Christian Penzkofer, Bernd Irmer, and Sebastian W. Schmidt "Manufacturing and advanced characterization of sub-25nm diameter CD-AFM probes with sub-10nm tip edges radius", Proc. SPIE 8681, Metrology, Inspection, and Process Control for Microlithography XXVII, 86811I (10 April 2013); https://doi.org/10.1117/12.2011451

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE