Paper
18 June 2013 Thin film coating analysis using a novel IR camera and a broadband Echelle spectrograph
Seth Pappas, Burt Beardsley, George Ritchie
Author Affiliations +
Abstract
An echelle spectrograph can provide high resolving power (wavelength/FWHM) across a broad spectral range. These optical instruments are commonly used in spectroscopy for atomic and molecular identification in astronomical observations and laboratory analysis. The wavelength range of an echelle spectrograph is ultimately limited by the capabilities of the detector used to acquire the spectral data. Silicon based CCD, EMCCD and CMOS sensors typically enable measurements from 200nm to 1100nm. Infrared Laboratories and Catalina Scientific Instruments (CSI) have collaborated to demonstrate an application that combines IR Lab’s TRIWAVE camera with CSI’s EMU120/65 echelle spectrograph. The TRIWAVE camera covers a spectral range of 300nm to 1600nm, greatly increasing the wavelength range for applications using the EMU-120/65 spectrograph. With this increased capability, an opportunity exists for measuring the dielectric coating thickness of thin film by extracting and analyzing interference fringes from the spectral data. Methods and results of this measurement will be presented.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seth Pappas, Burt Beardsley, and George Ritchie "Thin film coating analysis using a novel IR camera and a broadband Echelle spectrograph", Proc. SPIE 8704, Infrared Technology and Applications XXXIX, 87042F (18 June 2013); https://doi.org/10.1117/12.2016683
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectrographs

Sensors

Infrared cameras

Silicon

Cameras

Germanium

Spectral resolution

Back to Top