Paper
3 March 2014 Differentiating fatty and non-fatty tissue using photoacoustic imaging
Author Affiliations +
Abstract
In this paper, we demonstrate a temporal-domain intensity-based photoacoustic imaging method that can differentiate between fatty and non-fatty tissues. PA pressure intensity is partly dependent on the tissue’s speed of sound, which increases as temperature increases in non-fatty tissue and decreases in fatty tissue. Therefore, by introducing a temperature change in the tissue and subsequently monitoring the change of the PA intensity, it is possible to distinguish between the two types of tissue. A commercial ultrasound system with a 128-element 5-14 MHz linear array transducer and a tunable ND:YAG laser were used to produce PA images. Ex-vivo bovine fat and porcine liver tissues were precooled to below 10°C and then warmed to room-temperature over ~1 hour period. A thermocouple monitored the temperature rise while PA images were acquired at 0.5°C intervals. The averaged intensity of the illuminated tissue region at each temperature interval was plotted and linearly fitted. Liver samples showed a mean increase of 2.82 %/°C, whereas bovine fat had a mean decrease of 6.24 %/°C. These results demonstrate that this method has the potential to perform tissue differentiation in the temporal-domain.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Leo Pan, Robert Rohling, Purang Abolmaesumi, Septimiu Salcudean, and Shuo Tang "Differentiating fatty and non-fatty tissue using photoacoustic imaging", Proc. SPIE 8943, Photons Plus Ultrasound: Imaging and Sensing 2014, 894354 (3 March 2014); https://doi.org/10.1117/12.2041047
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 4 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tissues

Photoacoustic spectroscopy

Liver

Tissue optics

Photoacoustic imaging

Temperature metrology

Transducers

Back to Top