Paper
31 March 2014 A temperature control algorithm of immersion liquid for immersion lithography
Junwei He, Xiaoping Li, Min Lei, Bing Chen, Jinchun Wang
Author Affiliations +
Abstract
Immersion lithography is one of the main technologies used to manufacture integrated circuits with the shortest feature size. In immersion lithography, temperature of immersion liquid is strictly constrained and its allowable range is less than ±0.01°C at 22°C. To meet this requirement, a temperature control algorithm adopted by the test rig which controls the temperature of the immersion liquid with process cooling water (PCW) via heat exchangers is proposed. By adjusting the flow rate of PCW through the heat exchangers, the control system varies the amount of heat exchanged, and the temperature of the immersion liquid can be properly controlled. The temperature control rig is a multi-disturbed, timevariant, non-linear and time-delayed system and its transfer function varies with the inlet temperature and flow rates of the streams through the heat exchangers. Considering the characteristics of the system, a cascade-connected fuzzy PID feedback algorithm is designed.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junwei He, Xiaoping Li, Min Lei, Bing Chen, and Jinchun Wang "A temperature control algorithm of immersion liquid for immersion lithography", Proc. SPIE 9052, Optical Microlithography XXVII, 90522F (31 March 2014); https://doi.org/10.1117/12.2046080
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Control systems

Fuzzy logic

Immersion lithography

Temperature metrology

Sensors

Photonic integrated circuits

Back to Top