Performance testing of the LMT/GTM primary surface actuators

David R. Smith; Kamal Souccar; César Arteaga Magaña; Gabriela Montalvo; José Luis Hernández Rebollar

doi:10.1117/12.2057265

19 August 2014 Performance testing of the LMT/GTM primary surface actuators

David R. Smith, Kamal Souccar, César Arteaga Magaña, Gabriela Montalvo, José Luis Hernández Rebollar

Proceedings Volume 9151, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation; 91512C (2014) https://doi.org/10.1117/12.2057265
Event: SPIE Astronomical Telescopes + Instrumentation, 2014, Montréal, Quebec, Canada

Abstract

The design of the Large Millimeter Telescope (LMT/GTM) relies on an active surface system for the primary reflector in order to meet its surface accuracy specifications. Each of the 180 segments of the 50m diameter primary surface is supported by four linear actuators, one for each corner. Currently, while awaiting completion of the reflector panels needed to populate the outer portion of the surface, the precision reflecting surface is limited to the inner three rings of segments, which provide a 32.5m diameter primary with 84 segments. The interim active surface system must provide control for these segments long enough to allow completion of the rest of the reflecting surface and procurement and installation of the final actuators. During the LMT/GTM first light program in 2011, the interim active surface system of 336 actuators suffered from a wide range of problems that prevented useful operation. Following extensive diagnostic testing in 2012, the project implemented a substantial actuator improvement program in the first half of 2013, including mechanical modifications and replacement of the control system electronics. Later, each actuator was characterized on an external test bench, providing demonstration of actuator operation and readiness, as well as calibration information to further improve absolute accuracy. In this paper, we present results of the accuracy and repeatability of the refurbished actuators, as well as results from the accelerated lifetime testing on site. The uniformity of the calibration coefficients is also presented and discussed. The results demonstrate that the refurbished actuator units are sufficient for the needs of the interim active surface system.

Citation Download Citation

David R. Smith, Kamal Souccar, César Arteaga Magaña, Gabriela Montalvo, and José Luis Hernández Rebollar "Performance testing of the LMT/GTM primary surface actuators", Proc. SPIE 9151, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 91512C (19 August 2014); https://doi.org/10.1117/12.2057265

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available