Single-mode single-frequency high peak power all-fiber MOPA at 1550 nm

L. V. Kotov; M. E. Likhachev; M. M. Bubnov; V. M. Paramonov; M. I. Belovolov; D. S. Lipatov; A. N. Guryanov

doi:10.1117/12.2066640

7 October 2014 Single-mode single-frequency high peak power all-fiber MOPA at 1550 nm

L. V. Kotov, M. E. Likhachev, M. M. Bubnov, V. M. Paramonov, M. I. Belovolov, D. S. Lipatov, A. N. Guryanov

Author Affiliations +

Proceedings Volume 9251, Technologies for Optical Countermeasures XI; and High-Power Lasers 2014: Technology and Systems; 92510R (2014) https://doi.org/10.1117/12.2066640
Event: SPIE Security + Defence, 2014, Amsterdam, Netherlands

Abstract

In this Report, we present a record-high-peak-power single-frequency master oscillator power amplifier (MOPA) system based on a newly developed double-clad large-mode-area Yb-free Er-doped fiber (DC-LMA-EDF). A fiber Bragg grating wavelength-stabilized fiber-coupled diode laser at λ=1551 nm with ~2 MHz spectral width was used as the master oscillator. Its radiation was externally modulated with a 5 kHz repetition rate and 92 ns pulse duration and then amplified in a core-pumped Er-doped fiber amplifier up to an average power of 4 mW. The amplified spontaneous emission (ASE) generated at the last preamplifier stage was suppressed by a narrow-band (0.7 nm) DWDM filter. The last MOPA stage was based on the recently developed single-mode DC-LMA-EDF with a mode field diameter of 25 microns and pump clad-absorption of 3 dB/m at λ=980 nm. The pump and the signal were launched into this fiber through a commercial pump combiner in a co-propagating amplifier scheme. At first, we used a 3-m long DC-LMAEDF. In such configuration, a peak power of 800 W was achieved at the output of the amplifier together with a ~ 12 % pump conversion slope efficiency. Further power scaling was limited by SBS. After that we shortened the fiber length to 1 m. As a result, owing to large unabsorbed pump power, the efficiency decreased to ~5 %. However, a peak power of more than 3.5 kW was obtained before the SBS threshold. In this case, the pulse shape changed and its duration decreased to ~60 ns owing to inversion depletion after propagation of the forward front of the pulse. To the best of our knowledge, the peak power of more than 3.5 kW reported here is the highest value ever published for a single-frequency single-mode silica-based fiber laser system operating near λ=1550 nm.

Citation Download Citation

L. V. Kotov, M. E. Likhachev, M. M. Bubnov, V. M. Paramonov, M. I. Belovolov, D. S. Lipatov, and A. N. Guryanov "Single-mode single-frequency high peak power all-fiber MOPA at 1550 nm", Proc. SPIE 9251, Technologies for Optical Countermeasures XI; and High-Power Lasers 2014: Technology and Systems, 92510R (7 October 2014); https://doi.org/10.1117/12.2066640

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Amplifiers

Fiber lasers

Fiber amplifiers

Optical amplifiers

Erbium

Laser scattering

Oscillators

Show All Keywords

Keywords/Phrases

Search In:

Publication Years