Paper
18 November 2014 Fabrication of lithium niobate-based low-loss bend optical waveguide
Xin Li, Ang Liu, Yu Qiu, Jie Feng, Jun-Jiang Chen, Xue-song Lin, Shi-han Yang, Zi-gang Zhou
Author Affiliations +
Abstract
The bend waveguide is one of the key components of photonic integration. In this paper, by using tightly focused femtosecond laser pulses with repetition rate of 76 MHz, pulse duration of 50 fs, average output power about 270mW, and the focus lens NA=0.65, we put forward a structure of waveguide that bent it to be 1/4 round, and research its mechanism by performing experiments. Under the above conditions, when the vertical scanning speed of the laser system is 0.8 mm / s, the width of the bend optical waveguide is about 10μm, the loss reaches a minimum value about 1dB/cm when the bend way’s radius is about 5mm. Based on the experimental results of the above parameters, we can fabricate a 1/4 round vertical bend fiber coupler, which can be applied to the connection between the chips or inter-level optical .The results showed that the bend lithium niobate waveguides can be applied in the field of optical communication and has important implications for the production of low loss, low cost and small size optical waveguide gratings , vertical fiber coupler, optical switches and other devices .
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xin Li, Ang Liu, Yu Qiu, Jie Feng, Jun-Jiang Chen, Xue-song Lin, Shi-han Yang, and Zi-gang Zhou "Fabrication of lithium niobate-based low-loss bend optical waveguide", Proc. SPIE 9266, High-Power Lasers and Applications VII, 92661M (18 November 2014); https://doi.org/10.1117/12.2073602
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Lithium niobate

Femtosecond phenomena

Crystals

Laser crystals

Lithium

Fiber couplers

Back to Top