Experimental study on elliptical vibration cutting for optical microstructures

Guo Li; Lin Che; Bo Wang; Fei Ding; Chen Feng Zhang

doi:10.1117/12.2069915

21 August 2014 Experimental study on elliptical vibration cutting for optical microstructures

Guo Li, Lin Che, Bo Wang, Fei Ding, Chen Feng Zhang

Author Affiliations +

Proceedings Volume 9283, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems; 928304 (2014) https://doi.org/10.1117/12.2069915
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China

Abstract

In the processing technology of optical microstructure, mechanical processing with high efficiency and quality is still dominating. However, with microstructure surface quality higher and higher, the precision and ultra precision cutting technology has been difficult to meet the needs of reality, and it still remains a big issue in production efficiency and cost. In this case, the elliptical vibration cutting method is created. At present, research on the effect of elliptical vibration cutting on surface quality of microstructures with special optical properties such as V-groove, micro pyramid and sinusoidal grid surface is rarely seen. This paper focuses on the elliptical vibration cutting process of arc groove and V-groove, aiming at finding the discipline of various parameters (frequency, amplitude, feed rate) and analyzing the surface quality through experiments. Firstly, the principle of elliptical vibration cutting is introduced, the cutting mechanism and the theoretical error are analyzed, and a vibration cutting system is designed for precision machining. Because the surface quality and burr play have a huge impact on optical microstructure, effects of the vibration frequency (0-2kHz), amplitude (0.5-2.5μm) as well as feed rate (6-30mm/min) on surface quality and burr suppression are analyzed. The experimental results show that compared to normal cutting, elliptical vibration cutting has obvious advantages. With the increases of the frequency and amplitude, the surface quality improves significantly, the surface roughness is changed from 61.5nm to 25.3nm, and burr has been suppressed to some extent.

Citation Download Citation

Guo Li, Lin Che, Bo Wang, Fei Ding, and Chen Feng Zhang "Experimental study on elliptical vibration cutting for optical microstructures", Proc. SPIE 9283, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems, 928304 (21 August 2014); https://doi.org/10.1117/12.2069915

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE