Paper
9 March 2015 Large area LED package
L. Goullon, R. Jordan, T. Braun, J. Bauer, Karl Friedrich Becker, M. Hutter, M. Schneider-Ramelow, K.-D. Lang
Author Affiliations +
Abstract
Solid state lighting using LED-dies is a rapidly growing market. LED-dies with the needed increasing luminous flux per chip area produce a lot of heat. Therefore an appropriate thermal management is required for general lighting with LEDdies. One way to avoid overheating and shorter lifetime is the use of many small LED-dies on a large area heat sink (down to 70 μm edge length), so that heat can spread into a large area while at the same time light also appears on a larger area. The handling with such small LED-dies is very difficult because they are too small to be picked with common equipment. Therefore a new concept called collective transfer bonding using a temporary carrier chip was developed. A further benefit of this new technology is the high precision assembly as well as the plane parallel assembly of the LED-dies which is necessary for wire bonding. It has been shown that hundred functional LED-dies were transferred and soldered at the same time. After the assembly a cost effective established PCB-technology was applied to produce a large-area light source consisting of many small LED-dies and electrically connected on a PCB-substrate. The top contacts of the LED-dies were realized by laminating an adhesive copper sheet followed by LDI structuring as known from PCB-via-technology. This assembly can be completed by adding converting and light forming optical elements. In summary two technologies based on standard SMD and PCB technology have been developed for panel level LED packaging up to 610x 457 mm2 area size.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Goullon, R. Jordan, T. Braun, J. Bauer, Karl Friedrich Becker, M. Hutter, M. Schneider-Ramelow, and K.-D. Lang "Large area LED package", Proc. SPIE 9383, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XIX, 93831A (9 March 2015); https://doi.org/10.1117/12.2079380
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Copper

Semiconducting wafers

LED lighting

Adhesives

Glasses

Light sources

RELATED CONTENT


Back to Top