Paper
6 March 2015 Comparison between angle interferometer and angle encoder during calibration of autocollimator
Author Affiliations +
Proceedings Volume 9446, Ninth International Symposium on Precision Engineering Measurement and Instrumentation; 944624 (2015) https://doi.org/10.1117/12.2180902
Event: International Symposium on Precision Engineering Measurement and Instrumentation, 2014, Changsha/Zhangjiajie, China
Abstract
An angle interferometer was set up using concept ‘ratio of two lengths’ and an angle encoder was set up using concept ‘subdivision of full circle (2π rad=360°)’ at the National Institute of Metrology, China (NIM). For the analysis of the systematic errors of each device, two autocollimator calibration systems were separately set up based on the angle interferometer and the angle encoder with a similar measuring uncertainty (around 0.1″). An autocollimator was calibrated using two systems in the same measurement range (±1000″) and the same measurement step (10″). The systematic errors of each system were found through comparison between their original calibration results. The compensation curves were calculated using the analysis results, and two systems’ original calibration results were compensated according to two systems’ compensation curves. The maximum difference between the compensated calibration results of two systems was 0.05″ which is lower than measuring uncertainty of each system.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yao Huang, Zi Xue, and He Yan Wang "Comparison between angle interferometer and angle encoder during calibration of autocollimator", Proc. SPIE 9446, Ninth International Symposium on Precision Engineering Measurement and Instrumentation, 944624 (6 March 2015); https://doi.org/10.1117/12.2180902
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Interferometers

Computer programming

Autocollimators

Mirrors

Laser systems engineering

Head

Back to Top