Simple ps microchip Nd:YVO4 laser with 3.3 ps pulses at 0.2 - 1.4 MHz and single-stage amplification to the microjoule level

Erdal Türkyilmaz; Jan Lohbreier; Christian Günther; Eva Mehner; Daniel Kopf; Harald Giessen; Bernd Braun

doi:10.1117/12.2213598

16 March 2016 Simple ps microchip Nd:YVO₄ laser with 3.3 ps pulses at 0.2 - 1.4 MHz and single-stage amplification to the microjoule level

Erdal Türkyilmaz, Jan Lohbreier, Christian Günther, Eva Mehner, Daniel Kopf, Harald Giessen, Bernd Braun

Author Affiliations +

Proceedings Volume 9726, Solid State Lasers XXV: Technology and Devices; 97260V (2016) https://doi.org/10.1117/12.2213598
Event: SPIE LASE, 2016, San Francisco, California, United States

Abstract

Commercial picosecond sources have found widespread applications. Typical system parameters are pulse widths below 20 ps, repetition rates between 0.1 to 2 MHz, and micro Joule level pulse energies. Most systems are based on short pulse modelocked oscillators, regenerative amplifiers, and pockel cells as active beam switches. In contrast we present a completely passive system, consisting of a passively Q-switched microchip laser, a single-stage amplifier, and a pulse compressor. The Q-switched microchip laser has a 50 μm long Nd:YVO₄-gain material optically bonded to a 4.6 mm thick undoped YVO₄-crystal. It delivers pulse widths of 40 ps and repetition rates of 0.2 – 1.4 MHz at a wavelength of 1.064 μm. The pulse energy is a few nJ. These 40-ps pulses are spectrally broadened in a standard single mode fibre and then compressed in a 24 mm long chirped Bragg grating to as low as 3.3 ps. The repetition rate can be tuned from app. 0.2 to 1.4 MHz by changing the pump power while the pulse width and the pulse energy from the microchip laser are unchanged. The spectral broadening in the fibre is observed throughout the pulse repetition rate, supporting sub-10- ps pulses. Finally, the pulses are amplified in a single-stage Nd:YVO4-amplifier up to the microjoule level (up to 4 μJ pulse energy). As a result the system delivers sub-10-ps pulses at a microjoule level with about 1 MHz repetition rate, and thus fulfills the requirements for ps-micromachining. It does not contain any active switching elements and can be integrated in a very compact setup.

Citation Download Citation

Erdal Türkyilmaz, Jan Lohbreier, Christian Günther, Eva Mehner, Daniel Kopf, Harald Giessen, and Bernd Braun "Simple ps microchip Nd:YVO₄ laser with 3.3 ps pulses at 0.2 - 1.4 MHz and single-stage amplification to the microjoule level", Proc. SPIE 9726, Solid State Lasers XXV: Technology and Devices, 97260V (16 March 2016); https://doi.org/10.1117/12.2213598

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available