Interactions between plasma and block copolymers used in directed self-assembly patterning

Stephen Sirard; Laurent Azarnouche; Emir Gurer; William Durand; Michael Maher; Kazunori Mori; Gregory Blachut; Dustin Janes; Yusuke Asano; Yasunobu Someya; Diane Hymes; David Graves; Christopher J. Ellison; C. Grant Willson

doi:10.1117/12.2220305

23 March 2016 Interactions between plasma and block copolymers used in directed self-assembly patterning

Stephen Sirard, Laurent Azarnouche, Emir Gurer, William Durand, Michael Maher, Kazunori Mori, Gregory Blachut, Dustin Janes, Yusuke Asano, Yasunobu Someya, Diane Hymes, David Graves, Christopher J. Ellison, C. Grant Willson

Author Affiliations +

Proceedings Volume 9782, Advanced Etch Technology for Nanopatterning V; 97820K (2016) https://doi.org/10.1117/12.2220305
Event: SPIE Advanced Lithography, 2016, San Jose, California, United States

Abstract

The directed self-assembly (DSA) of block copolymers offers a promising route for scaling feature sizes below 20 nm. At these small dimensions, plasmas are often used to define the initial patterns. It is imperative to understand how plasmas interact with each block in order to design processes with sufficient etch contrast and pattern fidelity. Symmetric lamella forming block copolymers including, polystyrene-b-poly(methyl methacrylate) and several high-χ silicon-containing and tin-containing block copolymers were synthesized, along with homopolymers of each block, and exposed to various oxidizing, reducing, and fluorine-based plasma processes. Etch rate kinetics were measured, and plasma modifications of the materials were characterized using XPS, AES, and FTIR. Mechanisms for achieving etch contrast were elucidated and were highly dependent on the block copolymer architecture. For several of the polymers, plasma photoemissions were observed to play an important role in modifying the materials and forming etch-resistant protective layers. Furthermore, it was observed for the silicon- and tin-containing polymers that an initial transient state exists, where the polymers exhibit an enhanced etch rate, prior to the formation of the etch-resistant protective layer. Plasma developed patterns were demonstrated for the differing block copolymer materials with feature sizes ranging from 20 nm down to approximately 5 nm.

Citation Download Citation

Stephen Sirard, Laurent Azarnouche, Emir Gurer, William Durand, Michael Maher, Kazunori Mori, Gregory Blachut, Dustin Janes, Yusuke Asano, Yasunobu Someya, Diane Hymes, David Graves, Christopher J. Ellison, and C. Grant Willson "Interactions between plasma and block copolymers used in directed self-assembly patterning", Proc. SPIE 9782, Advanced Etch Technology for Nanopatterning V, 97820K (23 March 2016); https://doi.org/10.1117/12.2220305

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available