In-situ material state monitoring using embedded CdSe quantum dots

Cole D. Brubaker; Talitha M. Frecker; Ian Njoroge; Dylan O. Shane; Christine M. Smudde; Sandra J. Rosenthal; G. Kane Jennings; Douglas E. Adams

doi:10.1117/12.2218351

20 April 2016 In-situ material state monitoring using embedded CdSe quantum dots

Cole D. Brubaker, Talitha M. Frecker, Ian Njoroge, Dylan O. Shane, Christine M. Smudde, Sandra J. Rosenthal, G. Kane Jennings, Douglas E. Adams

Author Affiliations +

Proceedings Volume 9803, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2016; 980316 (2016) https://doi.org/10.1117/12.2218351
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016, Las Vegas, Nevada, United States

Abstract

The development of new, smart materials capable of intrinsically detecting and communicating the occurrence of external loads and resultant damage present in a material will be crucial in the advancement of future structural health monitoring (SHM) and nondestructive evaluation (NDE) technologies. Traditionally, many SHM and NDE approaches have relied on the use of physical sensors to monitor a structure for damage, but are often hindered by their requirements for power consumption and large-scale data collection. In this work, we seek to evaluate the effectiveness of ultrasmall, white-light emitting Cadmium Selenide quantum dots (CdSe QDs) as an alternative to providing in-situ material state monitoring capabilities, while also aiming to reduce reliance on data collection and power consumption to effectively monitor a material and structure for damage. To achieve this goal, CdSe QDs are embedded in an optically clear epoxy composite matrix and exposed to external mechanical loadings. Initial results show a corresponding relationship between the shifts in observed emission spectra and external load for samples containing CdSe QDs. The effectiveness of CdSe QDs as a surface strain gauge on aluminum and fiberglass are also investigated in this paper. By monitoring changes in the emission spectra for materials containing CdSe QDs before, during and after the application of external loads, the effectiveness of CdSe QDs for communicating the occurrence of external loads acting on a material and detecting changes in material state is evaluated.

Citation Download Citation

Cole D. Brubaker, Talitha M. Frecker, Ian Njoroge, Dylan O. Shane, Christine M. Smudde, Sandra J. Rosenthal, G. Kane Jennings, and Douglas E. Adams "In-situ material state monitoring using embedded CdSe quantum dots", Proc. SPIE 9803, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2016, 980316 (20 April 2016); https://doi.org/10.1117/12.2218351

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE