Paper
3 May 2016 Is there an optimum detector size for digital night vision goggles?
Author Affiliations +
Abstract
In previous studies maximum acquisition range was achieved when Fλ/d approached 2. There was no constraint on magnification or field-of-view. This suggested that detector size approach λ/2 when F = 1. Night vision goggles typically have a fixed FOV of 40 deg with unity magnification. Digital night vision goggles (DNVG) acquisition range is limited by the human visual system resolution of 0.291 mrad (20/20 vision). This suggests the maximum number of horizontal detectors should be about 2500 with a minimum pixel size of about 8 μm when F = 1 and aperture = 1 inch. Values change somewhat depending upon f-number and noise level. Ranges are provided for GaAs and InGaAs detectors under starlight conditions. The different spectral responses create minimum resolvable contrast (MRC) test issues.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerald C. Holst "Is there an optimum detector size for digital night vision goggles?", Proc. SPIE 9820, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXVII, 98200C (3 May 2016); https://doi.org/10.1117/12.2228529
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Indium gallium arsenide

Night vision goggles

Gallium arsenide

Quantum efficiency

Signal to noise ratio

Systems modeling

Back to Top