Open Access
2 May 2013 Chromatic changes to artificial irises produced using different techniques
Lisiane C. Bannwart, Marcelo C. Goiato, Daniela M. dos Santos, Amalia Moreno, Aldieris A. Pesqueira, Marcela F. Haddad, Agda M. Andreotti, Rodrigo A. de Medeiros
Author Affiliations +
Abstract
Ocular prostheses are important determinants of their users’ aesthetic recovery and self-esteem. Because of use, ocular prostheses longevity is strongly affected by instability of the iris color due to polymerization. The goal of this study is to examine how the color of the artificial iris button is affected by different techniques of artificial wear and by the application of varnish following polymerization of the colorless acrylic resin that covers the colored paint. We produce 60 samples (n=10 ) according to the wear technique applied: conventional technique without varnish (PE); conventional technique with varnish (PEV); technique involving a prefabricated cap without varnish (CA); technique involving a prefabricated cap with varnish (CAV); technique involving inverted painting without varnish (PI); and technique involving inverted painting with varnish (PIV). Color readings using a spectrophotometer are taken before and after polymerization. We submitted the data obtained to analyses of variance and Tukey’s test (P<0.05 ). The color test shows significant changes after polymerization in all groups. The PE and PI techniques have clinically acceptable values of ΔE , independent of whether we apply varnish to protect the paint. The PI technique produces the least color change, whereas the PE and CA techniques significantly improve color stability.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2013/$25.00 © 2013 SPIE
Lisiane C. Bannwart, Marcelo C. Goiato, Daniela M. dos Santos, Amalia Moreno, Aldieris A. Pesqueira, Marcela F. Haddad, Agda M. Andreotti, and Rodrigo A. de Medeiros "Chromatic changes to artificial irises produced using different techniques," Journal of Biomedical Optics 18(5), 058002 (2 May 2013). https://doi.org/10.1117/1.JBO.18.5.058002
Published: 2 May 2013
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Iris

Colorimetry

Polymerization

Polymers

Surface plasmons

Adhesives

Statistical analysis

RELATED CONTENT

Bending artificial muscle from nylon filaments
Proceedings of SPIE (April 15 2016)
Industrial use of conductive adhesives for SMT assemblies
Proceedings of SPIE (August 28 1998)
Biological adhesives and fastening devices
Proceedings of SPIE (April 04 2012)
New developments of process technologies for microfabrication
Proceedings of SPIE (September 05 1997)
Fabrication of plastic microfluidic components
Proceedings of SPIE (September 10 1998)

Back to Top