Open Access
1 March 2006 Label-free measurement of microbicidal gel thickness using low-coherence interferometry
Kelly E. Braun, Jeffrey D. Boyer, Marcus H. Henderson, David F. Katz, Adam Wax
Author Affiliations +
Abstract
Spectral-domain low-coherence interferometry (LCI) was used to measure the thickness of microbicidal gels applied to a cylindrical calibration test socket. Microbicides are topical formulations containing active ingredients targeted to inhibit specific pathogens that are currently under development for application to the epithelial lining of the lower female reproductive tract to combat sexually transmitted infections such as HIV. Understanding the deployment and drug delivery of these formulations is vital to maximizing their effectiveness. Previously, in vivo measurements of microbicidal formulation thickness were assessed using fluorescence measurements of fluorescein-labeled gels via an optical endoscope-based device. Here we present an LCI-based device that measures the thickness of a formulation without the use of any exogenous agents by analyzing the interference pattern generated between the reflections from the front and back surface of the sample. Results are presented that validate the effectiveness and performance of the LCI measurement in a clinically relevant system as compared to an existing fluorescence-based method. The impact of the new LCI-based design on in vivo measurements is discussed.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Kelly E. Braun, Jeffrey D. Boyer, Marcus H. Henderson, David F. Katz, and Adam Wax "Label-free measurement of microbicidal gel thickness using low-coherence interferometry," Journal of Biomedical Optics 11(2), 020504 (1 March 2006). https://doi.org/10.1117/1.2192767
Published: 1 March 2006
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Interferometry

In vivo imaging

Luminescence

Fiber couplers

Interfaces

Coating

Back to Top