Open Access
12 March 2012 Extraction of effective parameters of anisotropic optical materials using a decoupled analytical method
Thi Thu Hien Pham, Yu-Lung Lo
Author Affiliations +
Abstract
A decoupled analytical technique based on the Mueller matrix method and the Stokes parameters is proposed for extracting effective parameters of anisotropic optical materials in linear birefringence (LB), linear dichroism (LD), circular birefrinegence (CB), and circular dichroism (CD) properties. This technique is essential in determining the optical properties of opto-electric or biomedical materials for the development of advanced inspection and/or diagnostic applications. The error and resolution analysis of the proposed approach is demonstrated by extracting the effective parameters given an assumption of errors ranging ±0.005 in the values of the output Stokes parameters. The results confirm the ability of the proposed method to yield full-range measurements of all the optical parameters. The decoupled nature of the analytical model yields several important advantages, including an improved accuracy and the ability to extract the parameters of optical samples with only LB, CB, LD, or CD property without using compensation technique or pretreatment. Moreover, by decoupling the extraction process, the "multiple solutions" problem inherent in previous models presented by the current group is avoided.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Thi Thu Hien Pham and Yu-Lung Lo "Extraction of effective parameters of anisotropic optical materials using a decoupled analytical method," Journal of Biomedical Optics 17(2), 025006 (12 March 2012). https://doi.org/10.1117/1.JBO.17.2.025006
Published: 12 March 2012
Lens.org Logo
CITATIONS
Cited by 32 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dichroic materials

Error analysis

Birefringence

Polarization

Polarizers

Statistical analysis

Phase measurement

Back to Top