Comparative study of extreme ultraviolet absorber materials using lensless actinic imaging

Sara Fernandez; Dimitrios Kazazis; Rajeev Rajendran; Iacopo Mochi; Patrick Helfenstein; Shusuke Yoshitake; Yasin Ekinci

doi:10.1117/1.JMM.18.1.013506

18 March 2019 Comparative study of extreme ultraviolet absorber materials using lensless actinic imaging

Sara Fernandez, Dimitrios Kazazis, Rajeev Rajendran, Iacopo Mochi, Patrick Helfenstein, Shusuke Yoshitake, Yasin Ekinci

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 18, Issue 1, 013506 (March 2019). https://doi.org/10.1117/1.JMM.18.1.013506

Abstract

Background: One of the challenges for extreme ultraviolet (EUV) lithography is the mitigation of mask three-dimensional effects arising from the oblique incident angle and the mask topography. As the scanners’ numerical aperture and the pattern aspect ratio increase, these effects become more prominent. A potential solution to reduce them consists in replacing the current TaBN absorber for a higher-k material. Aim: We demonstrate the potential of a mask inspection platform to evaluate the impact of different absorber materials on actinic defect inspection. Approach: We evaluate the performance of a reflective-mode EUV mask scanning microscope (RESCAN), our actinic lensless inspection tool, with three different absorber materials (hydrogen silsesquioxane, TaBN, and Ni). We study the effect of these materials on the image formation and compare the defect maps. Results: The Ni absorber mask exhibits a better contrast compared to the TaBN one, even though the thickness of the layers differs only by 10 nm. Programmed defects are localized and detected with a high signal-to-noise ratio (SNR). Conclusions: The gain in contrast for the Ni absorber being significant, the SNR is higher for a smaller defect in a TaBN absorber photomask. RESCAN allows the evaluation of the performance of absorber materials in defectivity and image formation on small samples.

Citation Download Citation

Sara Fernandez, Dimitrios Kazazis, Rajeev Rajendran, Iacopo Mochi, Patrick Helfenstein, Shusuke Yoshitake, and Yasin Ekinci "Comparative study of extreme ultraviolet absorber materials using lensless actinic imaging," Journal of Micro/Nanolithography, MEMS, and MOEMS 18(1), 013506 (18 March 2019). https://doi.org/10.1117/1.JMM.18.1.013506

Received: 9 October 2018; Accepted: 28 February 2019; Published: 18 March 2019

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE