20 May 2019 Spiral spring electrostatic actuator for double-layer deformable mirror with continuous phase sheet
Yu Zhou, Cyrus Shafai, James Dietrich
Author Affiliations +
Abstract
A new electrostatic actuator for a double-layer deformable mirror (DM) with continuous phase sheet is presented. The electrostatic actuator employs an upper electrode consisting of multiple Archimedean spiral spring arms supporting a small mass central attachment point and is capable of separating the parameters of actuation voltage, spring constant, and resonance. The feature reduces the complexity in the designing of a double-layer DM with continuous phase sheet, which is widely employed in the adaptive optics area of astronomy. The fabricated device has a diameter of 1250  μm with four single-crystal silicon spiral arms each having a length of 6030  μm, thickness of 15  μm, and width of 30  μm. The actuator was simulated and tested to have a resonant frequency above 2600 Hz and was simulated to be capable of reaching ∼5-μm displacement with a drive voltage of <30  V with an actuator–electrode separation of 15  μm, based on the performance parameter found experimentally.
© 2019 Society of Photo-Optical Instrumentation Engineers (SPIE) 1932-5150/2019/$25.00 © 2019 SPIE
Yu Zhou, Cyrus Shafai, and James Dietrich "Spiral spring electrostatic actuator for double-layer deformable mirror with continuous phase sheet," Journal of Micro/Nanolithography, MEMS, and MOEMS 18(2), 025501 (20 May 2019). https://doi.org/10.1117/1.JMM.18.2.025501
Received: 13 February 2019; Accepted: 29 April 2019; Published: 20 May 2019
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Electrodes

Deformable mirrors

Etching

Silicon

Semiconducting wafers

Chemical elements

RELATED CONTENT


Back to Top