Developing a viable multilayer coating process for extreme ultraviolet lithography reticles

Paul B. Mirkarimi; Eberhard Adolf Spiller; Sherry L. Baker; Victor R. Sperry; Daniel Gorman Stearns; Eric M. Gullikson

doi:10.1117/1.1631006

1 January 2004 Developing a viable multilayer coating process for extreme ultraviolet lithography reticles

Paul B. Mirkarimi, Eberhard Adolf Spiller, Sherry L. Baker, Victor R. Sperry, Daniel Gorman Stearns, Eric M. Gullikson

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 3, Issue 1, (January 2004). https://doi.org/10.1117/1.1631006

Abstract

Reticle blanks for extreme ultraviolet lithography (EUVL) are fabricated by depositing reflective Mo/Si multilayer films on superpolished substrates. To obtain a reasonable cost of ownership for EUVL, the multilayer films must be nearly defect free, have excellent reflectance/thickness uniformity, and have a high EUV reflectance. Small particle contaminants on the substrate that can nucleate printable Mo/Si phase defects are a serious concern. We develop an ion-beam thin film planarization process for mitigating the effect of small substrate contaminants that relies on enhancing the smoothing capability of Mo/Si multilayer films; we observe that etching of the Si layers in between deposition steps can yield a significant improvement in smoothing. Using this process substrate particles as large as ~50 nm in diameter are smoothed to ~1 nm in height, rendering them harmless. We further develop this process so that it retains these particle-smoothing capabilities while also achieving a high EUV reflectance and excellent uniformity.

©(2004) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Paul B. Mirkarimi, Eberhard Adolf Spiller, Sherry L. Baker, Victor R. Sperry, Daniel Gorman Stearns, and Eric M. Gullikson "Developing a viable multilayer coating process for extreme ultraviolet lithography reticles," Journal of Micro/Nanolithography, MEMS, and MOEMS 3(1), (1 January 2004). https://doi.org/10.1117/1.1631006

Published: 1 January 2004

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE