Rapid fabrication of polymethylmethacrylate micromold masters using a hot intrusion process

Pun Pang Shiu; Mile Ostojic; George K. Knopf; Suwas K. Nikumb

doi:10.1117/1.3033208

1 October 2008 Rapid fabrication of polymethylmethacrylate micromold masters using a hot intrusion process

Pun Pang Shiu, Mile Ostojic, George K. Knopf, Suwas K. Nikumb

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 7, Issue 4, 043012 (October 2008). https://doi.org/10.1117/1.3033208

Abstract

A method for rapid fabrication of mold masters for soft-molding of polydimethylsiloxane (PDMS) microfluidic devices is successfully developed and tested. The method involves laser micromachining and a hot-intrusion process, and produces mold masters from polymethylmethacrylate (PMMA) substrates. A metallic mask with microchannel line features of various widths (25 to 200 µm) is initially created by laser micromachining a 75-µm-thick brass sheet. Under the hot-intrusion process, a 2-mm-thick solid PMMA substrate is then heated and molded under pressure to force the softened material through the shaped microfeatures in the mask. The height of the extruded microrelief is determined by the pressure, temperature, and time profile of the hot-intrusion process. A mathematical model that characterizes the rapid fabrication process and enables the operator to select appropriate process parameters is described. The derived empirical model is based on experimental observations where extruded microrelief heights were varied from 5 to 75 µm with aspect ratios from 0.1 to 0.46, and radii of the extruded profile from 12 to 270 µm. The proposed model is developed to describe the relationship between key process parameters and the extruded heights of the microreliefs. Furthermore, the model provides the operator with simple guidelines for selecting the process parameters. An example of PDMS microfluidic devices replicated by the rapid micromold fabrication methodology is presented to illustrate the quality of the resultant features of microchannels.

©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Pun Pang Shiu, Mile Ostojic, George K. Knopf, and Suwas K. Nikumb "Rapid fabrication of polymethylmethacrylate micromold masters using a hot intrusion process," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(4), 043012 (1 October 2008). https://doi.org/10.1117/1.3033208

Published: 1 October 2008

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE