A comparative study on thermal lensing characteristics of low (∼500 °C) and high (∼1500 °C) temperature variants of copper vapor laser

Ramakanta Biswal; Govind K. Mishra; Girija S. Purbia; Pravin K. Agrawal; Om Prakash; Sudhir K. Dixit; Jeevan K. Mittal

doi:10.1117/1.3609799

1 August 2011 A comparative study on thermal lensing characteristics of low (∼500 °C) and high (∼1500 °C) temperature variants of copper vapor laser

Ramakanta Biswal, Govind K. Mishra, Girija S. Purbia, Pravin K. Agrawal, Om Prakash, Sudhir K. Dixit, Jeevan K. Mittal

Author Affiliations +

Optical Engineering, Vol. 50, Issue 8, 084202 (August 2011). https://doi.org/10.1117/1.3609799

Abstract

This paper presents a comparative study on thermal lensing characteristics of a low temperature copper vapor laser (CVL) (LT-CVL as Copper-HBr laser) and a high temperature CVL (HT-CVL as elemental CVL). Interferometric techniques were used to study the combined thermal lens power of active gaseous medium and discharge sealing optical windows as well as that of the optical windows separately at different electrical input powers. As the input power varied from 2.7 to 4.6 kW, the combined thermal lens power varied from −1.4 to +0.94 km⁻¹ for LT-CVL and from +1.4 to +13 km−1 for HT-CVL. The thermal lens power of the windows varied from +3 to +15 km⁻¹ for HT-CVL. On the other hand, for LT-CVL, the thermal lens due to windows was very weak and could not be measured. It was observed that the origin of net thermal lensing mostly resides in the discharge tube windows owing to its higher temperature variation of refractive index as compared to that of gaseous active medium. The weaker thermal lens characteristics of an LT-CVL was attributed to its much lower working temperature and relatively flatter radial gas temperature profile than that of an HT-CVL.

©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Ramakanta Biswal, Govind K. Mishra, Girija S. Purbia, Pravin K. Agrawal, Om Prakash, Sudhir K. Dixit, and Jeevan K. Mittal "A comparative study on thermal lensing characteristics of low (∼500 °C) and high (∼1500 °C) temperature variants of copper vapor laser," Optical Engineering 50(8), 084202 (1 August 2011). https://doi.org/10.1117/1.3609799

Published: 1 August 2011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE