20 October 2017 Field deployable pushbroom hyperspectral imaging polarimeter
Author Affiliations +
Abstract
Hyperspectral imaging polarimetry enables both the spectrum and its spectrally resolved state of polarization to be measured. This information is important for identifying material properties for various applications in remote sensing and agricultural monitoring. We describe the design and performance of a ruggedized, field deployable hyperspectral imaging polarimeter, designed for wavelengths spanning the visible to near-infrared (450 to 800 nm). An entrance slit was used to sample the scene in a pushbroom scanning mode across a 30 deg vertical by 110 deg horizontal field-of-view. Furthermore, athermalized achromatic retarders were implemented in a channel spectrum generator to measure the linear Stokes parameters. The mechanical and optical layout of the system and its peripherals, in addition to the results of the sensor’s spectral and polarimetric calibration, are provided. Finally, field measurements are also provided and an error analysis is conducted. With its present calibration, the sensor has an absolute polarimetric error of 2.5% RMS and a relative spectral error of 2.3% RMS.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2017/$25.00 © 2017 SPIE
Michael W. Kudenov, Mariano E. Lowenstern, Julia M. Craven, and Charles F. LaCasse "Field deployable pushbroom hyperspectral imaging polarimeter," Optical Engineering 56(10), 103107 (20 October 2017). https://doi.org/10.1117/1.OE.56.10.103107
Received: 1 June 2017; Accepted: 22 September 2017; Published: 20 October 2017
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarimetry

Hyperspectral imaging

Reflectivity

Polarization

Sensors

Calibration

Prisms

Back to Top