The ESA-Darwin mission is devoted to direct detection and spectroscopic characterization of earthlike exoplanets. Starlight rejection is achieved by nulling interferometry from space so as to make detectable the faintly emitting planet in the neighborhood.
In that context, Alcatel Alenia Space has developed a nulling breadboard for ESA in order to demonstrate in laboratory conditions the rejection of an on-axis source. This device, the Multi Aperture Imaging Interferometer (MAII) demonstrated high rejection capability at a relevant level for exoplanets, in singlepolarized and mono-chromatic conditions.
In this paper we report on the new multi-axial configuration of MAII and we summarize our late nulling results.
Today, optical instruments with FOV of ±30 degrees or more can be achieved by combining several optical modules thus increasing the complexity at instrument level in the design, integration, validation and calibration phases. For instance the MERIS instrument on the ENVIronment SATellite (ENVISAT) has a 68.5 degree FOV shared between 5 identical modules. Each one of those modules needs to be calibrated independently and the modules require to be co-registrated, which leads to stringent constraints at system level in terms of stability. Reducing the number of modules to achieve large FOVs will have potentially beneficial impact on the mass and volume of the instrument and will ease the calibration and co-registration process.
ESA's Darwin mission is devoted to direct detection and spectroscopic characterisation of Earth-like planets in the
thermal infrared domain by nulling interferometry in space. This technique requires deep and stable starlight rejection to
an efficiency around 106 over the whole spectral band. Darwin is a major target for Thales Alenia Space, and is
considered as a strategic part of its programme roadmap.
In this paper we present the main outcomes of the Darwin mission study conducted by Thales Alenia Space from Oct.
2005 to Jul. 2007. Studying this mission in depth, our proposed most promising configuration features spacecraft in non
planar arrangement (called Emma). It offers the best science return in terms of number of stars detected and sky
accessibility while staying compliant with mass and volume constraints of a single Ariane 5 launch. Our solution
dramatically alleviates engineering constraints thanks to a fully non deployable concept. As compared to the more
conventional planar arrangement (called Charles), Emma suppresses Single Point Failures and spurious flexible modes,
thus maximising both the system reliability and the stability of the dynamical environment. Emma is fully compatible
with either 3 or 4 collectors.
This paper presents the development and tests in the thermal infrared of Integrated Optics (IO) technology in preparation of ESA's space mission Darwin. This mission aims to detect and characterize earth-like planets orbiting solar-type stars, using nulling interferometry in the spectral range 6 - 20 μm. Since typically 1:1e6 rejection of starlight is required, wavefront modal filtering is mandatory. Thus, mid-infrared single-mode IO is being developed in the framework of the ESA-funded "Integrated Optics for Darwin" project. Beyond its wavefront filtering capabilities, an IO component may support various optical functions, and is thus likely to ease instrumental design. This paper addresses the manufacturing process and the characterization tests results of newly developed IO devices. Investigated solutions are dielectric waveguides based on Chalcogenide glasses and Hollow Metallic Waveguides. In a first phase, the pre-selected technological solutions were validated and modal behavior of the manufactured devices was demonstrated, both through polarization and spectral analysis. Preliminary nulling ratios up to 5000 have been obtained with an IO modal filter in the 6 - 20 μm range. In a second phase of the project, the development of more complex IO functions was attempted. The methods used to validate the waveguide behavior and interferometric capabilities are also discussed. After achieving 1:1e5 polychromatic extinctions with similar solutions in the near IR, the presented results further underline the credibility of a mid-infrared IO concept for Darwin.
The ESA-Darwin mission is devoted to direct detection and spectroscopic characterization of earth-like exoplanets in the
thermal infrared domain by nulling interferometry in space. This technique yields the rejection of starlight so as to make
detectable the faintly emitting planet in the neighborhood.
In that context, Alcatel Alenia Space has developed a nulling breadboard for ESA in order to perform the rejection of an
unresolved on-axis source. This device, the Multi Aperture Imaging Interferometer (MAII) demonstrated high rejection
capability at a relevant level for exoplanets, in single-polarized and mono-chromatic conditions.
In this paper we report on our late investigations using the MAII focussed on modal filtering. The dependence of the
nulling ratio on the degeneracy of the guided modes in the modal filter is put into evidence.
This paper reports the design, realisation, and characterisation of singlemode hollow conductive waveguides for stellar interferometry. These waveguides are developed in the frame of technological developments for the ESA DARWIN mission, which aims at direct detection of exoplanets and biomarkers on them (proof of life) using nulling interferometry in the 6-20 μm spectral range. The use of singlemode waveguides is mandatory in order to meet DARWIN required performance by achieving a modal filtering better than 10-6. While there is ongoing developments of infrared dielectric fibers or integrated waveguides, both using chalcogenide glasses or silver halide compounds, this paper presents the first realisation and characterisation of singlemode hollow conductive waveguides in the DARWIN spectral range, by means of standard microelectronic and wafer bonding technologies.
We report on first scientific observations of a few bright late type stars by direct long baseline interferometry in the thermal infrared (3.4 to 4.1 microns) obtained with the TISIS (Thermal Infrared Stellar Interferometric Set-up) experiment of the IOTA (Infrared and Optical Telescope Array) interferometer. Beam combination is provided by a single-mode fluoride glass coupler optimized for operation in that wavelength domain and yielding visibility measurements with 2% typical relative accuracy. First precise estimations of uniform disk diameters for (alpha) Orionis, (alpha) Herculis, o Ceti and R Leonis are presented in the L band. Very large increase (50 to 70%) in apparent angular diameters have been found for the 2 Mira stars o Ceti and R Leonis with respect to previous measurements obtained at shorter infrared wavelengths and same luminosity phase. Extended optically thin close-by dust shells characterized by Infrared Spatial Interferometer measurements are not found to play a significant role in the observed L band intensity distribution. Gas properties are likely to have a greater impact at these wavelengths. Our o Ceti interferometric observations look indeed in good agreement with the presence of very extended circumstellar gas layers (mostly H2O and SiO) derived from recent Infrared Space Observatory thermal infrared spectral data.
We present K-band observations of five Mira stars with the IOTA interferometer. The interferograms were obtained with the FLUOR fiber optics beam combiner which provides high- accuracy visibility measurements in spite of time-variable atmospheric conditions. For the Mira stars X Oph, R Aql, RU Her, R Ser, and V CrB we derived the uniform-disk diameters 11.7 mas, 10.9 mas, 8.4 mas, 8.1 mas, and 7.9 mas (+/- 0.3 mas), respectively. Simultaneous photometric observations yielded the bolometric fluxes. The derived angular Rosseland radii and the bolometric fluxes allowed the determination of effective temperatures. For instance, the effective temperature of R Aql was determined to be 3072 K +/- 161 K. A Rosseland radius for R Aql of 250 R. +/- 63 R. was derived from the angular Rosseland radius of 5.5 mas +/- 0.2 mas and the HIPPARCOS parallax of 4.73 mas +/- 1.19 mas. The observations were compared with theoretical Mira star models (D/P model Rosseland radius equals 255 R.; measured R Aql Rosseland radius equals 250 R. +/- 63 R.).
Because they have demonstrated very high visibility accuracies and have greatly simplified conventional interferometric recombination devices, single-mode fibers are being seriously considered in several optical interferometry projects. This paper deals with light coupling into single-mode fibers. An analytical expression of the coupling efficiency is derived for the monochromatic case. Then, the effect of purely static aberrations is considered. Finally, coupling in the presence of atmospheric turbulence is investigated for long exposure times. Using temporal sequencies of turbulent wavefronts, simulations are performed for a wide range of seeing conditions with both uncorrected turbulence and various levels of correction by an adaptive optics system.
The FLUOR project started in 1991 with a prototype fiber recombination unit that transformed a pair of independent 80 cm telescopes into a stellar interferometer. An improved version of this unit is now used as part of the instrumentation at the IOTA interferometer on Mt Hopkins (Arizona). The system is based on fluoride glass single-mode waveguides (non polarization-preserving) for observations at infrared wavelengths between 2 and 2.4 μm. A triple coupler performs the coherent recombination of the beams and extracts two calibration signals. A passive polarization control is sufficient to maintain the interferornetric efficiency above 80 %, with variations of the order of a few percents from one night to the next. The combination FLUOR/JOTA now routinely provides stellar interferograms on baselines ranging between 5 and 38 m, with an accuracy of 1 % or better in the fringe visibility measurements.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.