KEYWORDS: Solar cells, Nanowires, Silicon, Doping, Photovoltaics, Multijunction solar cells, Group III-V semiconductors, Beryllium, Electron beams, Microscopy
Today, the record in photovoltaic (PV) conversion efficiency is detained by multi-junction solar cells based on III-V semiconductors. However, the wide adoption of these devices is hindered by their high production cost, especially the expensive III-V substrates. As an alternative, a hybrid solar cell was proposed by LaPierre et al.1 The cell geometry, which combines a 2D Si bottom-cell with a nanowire (NW) top-cell in a tandem device, presents a theoretical efficiency record of 34% when the top-cell band gap lies around 1.7 eV[1],[2].
In this work, we report the elaboration, nanoscale characterization and device fabrication of solar cells based on axial junction GaAsP NWs. Organized GaAsP NWs were grown on patterned SiO2/Si(111) substrates by MBE. Junction was axially created during the growth by incorporating different doping impurities (Be for p- and Si for n-doping). In-situ surface passivation using a radial GaP shell was applied to reduce non-radiative recombinations on surface states[3]. Local I-V characteristics and electron beam induced current (EBIC) microscopy under different biases were used to probe the electrical properties and the generation patterns of individual NWs. The doping concentrations and the minority carrier diffusion lengths were extracted from the EBIC generation profiles. Macroscopic devices based on NW arrays were fabricated by dielectric encapsulation and ITO contacting. Top view EBIC analyses were applied to probe the device homogeneity.
References
[1] R.R. LaPierre et al., J. Appl. Phys. 110 (2011), 014310.
[2] S. Bu et al., Appl. Phys. Lett. 102 (2013), 031106.
[3] C. Himwas et al., Nanotechnology. 28 (2017), 495707.
KEYWORDS: Nanowires, Solar cells, Silicon, Electron beams, Microscopy, Doping, Photovoltaics, Multijunction solar cells, Group III-V semiconductors, Nanolithography
The record in photovoltaic conversion efficiency is detained by multi-junction solar cells based on III-V semiconductors. However, the wide adoption of these devices is hindered by their high production cost, to a large extent due to the expensive III-V substrates. As an alternative, a hybrid geometry has been proposed [LaPierre JAP 2011], which combines a 2D Si bottom cell with a III-V nanowire top cell in a tandem device. This approach, which may reach theoretical efficiencies of approx. 34%, requires smaller amounts of expensive III-V materials compared to conventional III-V tandem cells and benefits from the nanowire light trapping effects.
In this work, we report the fabrication and nanoscale characterization of two types of nanostructures for solar cells: radial GaAlAs and axial GaAsP p-n junction nanowires. Nanowires are grown by gallium-assisted molecular beam epitaxy using Be and Si as doping sources. The composition (probed by EDX and cathodoluminescence) was adjusted to tune the bandgap toward the optimal value for a III-V-on-Si tandem cell (approx. 1.7 eV). Local I-V characteristics and electron beam induced current (EBIC) microscopy under different biases are used to probe the electrical properties and the generation pattern of individual nanowires. For radial junction nanowires, EBIC mappings revealed a homogeneous collection of carriers on the entire nanowire length. For axial junction nanowires, the doping concentrations and the minority carrier diffusion lengths were extracted from the EBIC generation profiles. The effect of an epitaxial GaP passivating shell on the optical and generation properties was assessed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.