An optical fiber Febry-Perot (FP) temperature sensor based on virtual vernier effect is proposed. The parallel vernier effect is realized by superposing virtual reference interferometer to improve the sensitivity of temperature detection. This method can effectively avoid the measurement error caused by the external interference of the physical reference interferometer. The FP temperature sensor was made by sealed with thermosensitive polymer into a capillary. By measuring the wavelength shift of the interference valley, the temperature sensitivity of the sensor is 2.205 nm/°C. The generative approach of the virtual interference spectrum is proposed and the theoretical simulation is carried out. The physical and virtual reference interferometers were respectively used to carry out the comparative experiments of the vernier sensitization. The temperature sensitivities obtained by the physical and the virtual reference interferometers were 10.053 nm/°C and 9.911 nm/°C in the temperature range of 51-55°C, respectively. The sensitivity magnifications were 4.559 and 4.495 times respectively, which proved the feasibility of the FP sensor demodulation by using virtual vernier effect. This method can obtain an optical fiber temperature sensing system with high-sensitivity, low complexity and low cost.
A fiber optic refractive index sensor based on tapered capillary is proposed. A multimode interferometer generated by annular high-order mode is fabricated by fused thin-walled capillary between single-mode fibers, which has high refractive index sensitivity. The experimental results show that the sensor has a piecewise-linear refractive index response with gradually increasing sensitivity in the range of 1.3328~1.4553. It is found that the increase of capillary length is beneficial to the increase of refractive index sensitivity. For the sample with 10 mm capillary, the RI sensitivity is up to 7474.959 nm/RIU, the temperature sensitivity is only 9.48 pm/°C and the measurement error is ±2.12×10-3. The results show that the sensor has good accuracy and repeatability in refractive index measurement. The sensor is suitable for high refractive index range in biological process monitoring, where high refractive index sensitivity and low temperature cross sensitivity are required.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.