Additive manufacturing is rapidly growing, where selective laser sintering technology dominates for industrial use. In the case of polymer selective laser sintering, polyamide is the standard material. However, polyamide is an electrical insulator, and for specific applications, it would be desirable to be able to manufacture polymer-based electrically conductive parts. Electromagnetic compatibility is one of the most significant targeted applications, where the introduction of electric vehicles raises new electromagnetic compatibility demands. The goal is, therefore, to develop an electrically conductive composite material for selective laser sintering using graphene as the additive. Composites are prepared by mixing polyamide, graphene, and additives with varying graphene/polyamide ratios. The aim of this investigation is the laser-assisted processing of the resulting graphene/polyamide composites with various parameters to sinter the material, forming a solid conductive structure. The structure is characterized using SEM and resistance measurements. Results show sheet resistance values of about 700Ω/sq after laser-assisted processing with good powder flowability.
Lithium-ion batteries are widely used today due to their high energy density, long life cycles, and low self-discharge rates. It commonly uses graphite as an anode material with a high theoretical capacity of 372mAh/g. At the same time, several research groups explore ways to further increase the energy storage capacity of lithium-ion batteries by, for example, adding silicon to the graphite anode material. Silicon is naturally abundant and inexpensive, with low environmental impact and a significantly higher theoretical specific capacity of approximately 4200mAh/g. A drawback is that graphite-silicon composite anode materials tend to degrade during the charge/discharge cycles, leading to decreased storage capacity over time. This degradation is associated with the size of the silicon particles, where large, micrometer-sized silicon particles are more susceptible to instability than smaller, nanometre-sized particles. To address this issue, we present an investigation using laser-assisted processing of nano-graphite-silicon composites. This process uses low-cost micrometer-sized silicon particles mixed with nano-graphite powder and a 1064 nm continuous wave laser to process the nano-graphite-silicon-coated anode material under various conditions and atmospheres (ambient and nitrogen). The performance of the lithium-ion battery is affected by different processing conditions. Specifically, the intensity of the 0.25V and 0.5V anodic peaks, which indicate the delithiation of silicon, is particularly affected, with the inclusion of an additional broader shoulder peak at around 0.3-0.35V. Our investigation suggests that laser-assisted processing of nano-graphite-silicon-composite materials is a scalable concept with the potential to improve the performance of nano-graphite-silicon anodes for lithium-ion batteries.
In this work we present a promising method for fabrication of conductive tracks on paper based substrates by laser assisted reduction of Graphene Oxide (GO). Printed electronics on paper based substrates is be coming more popular due to lower cost and recyclability. Fabrication of conductive tracks is of great importance where metal, carbon and polymer inks are commonly used. An emerging option is reduced graphene oxide (r-GO), which can be a good conductor. Here we have evaluated reduction of GO by using a 532 nm laser source, showing promising results with a decrease of sheet resistance from >100 M Ω/Sqr for unreduced GO down to 126 Ω/Sqr. without any observable damage to the paper substrates.
In this work we have investigated the use of laser sintering of different ink-jet printed nano-particle links (NPIs) on paper substrates. Laser sintering is shown to offer a fast and non-destructive way to produce paper based printed electronics. A continuous wave fiber laser source at 1064 nm is used and evaluated in combination with a galvo-scanning mirror system. A conductivity in order of 2.16 * 107 S/m is reached for the silver NPI structures corresponding to nearly 35 % conductivity compared to that of bulk silver and this is achieved without any observable damage to the paper substrate.
In this work are shown the principle, first experimental results and a model design of a new type of multi channel Fourier transform (FT) spectrometer for visible (VIS) and infrared (IR) region operating in real time. The main principle of this spectrometer is that measured collected and collimated optical radiation passes through a linear array or matrix of optical Fabry-Perot interferometers. Each interferometer is placed in front of and close to each element of the array detector. By processing the signal the spectrum of the optical radiation can be extracted. This design does not require intermediate optics between interferometer and array detector and allows for a reliable and extremely compact construction. Production cost can be low when a simple wedge type interferometer is integrated with existing array or matrix detectors, e.g. CCD camera. One other benefit is that the shape of the interferometer determines whether the spectrometer is suitable for measuring wide spectra radiation or has the ability to discriminate optical coherent radiation. Experimental results achieved for VIS and NIR range of spectra are promising. The principals of this design can be used for a variety of applications besides as a spectrometer. For example warning systems for lasers and restricted coherency sources and also filtering of optical signals and for measuring the spectral content working in a wide spectral range.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.